Fender Jazz Bass Serial Number Check
Agata Schweiss
This is my serial number for my white 5 string Jazz bass, consequently the result came up as an American-made and Production Year: 2009.
It has active circuitry but no passive switch mode.
The body is Olympic white with a black 3 ply scratch plate/ pick guard, rosewood neck with white inlays. It also has Fender Corona stamped/ embossed on the 4 screw neck back plate and has one 9volt battery, not 2. The serial no. is stamped on the back of headstock.
Is there any other useful information to add, like its current value as it is good working condition and sounds awesome. I purchased it for $499 New Zealand dollars second hand.
Also whether or not the production year if there are any details on its active circuitry and/or pick ups used beside the normal fender issue.
Thank you Fred
Fender is a well-known guitar manufacturer that has been producing electric and acoustic guitars for over 70 years. To look up a Fender guitar serial number, you will need to know the brand and model of the guitar, as well as the location of the serial number.
Keep in mind that dating a Fender guitar can be challenging, especially if the guitar is a vintage or antique model. In some cases, the serial number may be missing or difficult to read, and other identifying features may have changed or been modified over time.
Real-time database crawlers are software programs that continuously scan a database and index its contents in real-time, as the data is being added or updated. This allows the indexed data to be searched or accessed almost immediately after it is entered into the database.
Real-time database crawlers are used in applications where it is important to have up-to-date and accurate information available for search or access. They are often used in industries such as finance, healthcare, and e-commerce, where real-time data is critical.
Keep in mind that real-time database crawlers are different from traditional database crawlers, which scan and index a database at a specific point in time. Real-time database crawlers operate continuously and update the index as data is being added or updated.
The reliability of a guitar serial number in dating a guitar can vary depending on the manufacturer and the specific guitar. In general, the serial number is a useful tool for determining the age and model of a guitar, but it is not always the most reliable method.
Despite these limitations, the serial number is still a useful tool for dating a guitar and can provide valuable information about the age and model of the guitar. However, it is important to consider other factors, such as the type of wood used, the shape of the headstock, the type of pickups, and the type of hardware, in order to accurately determine the age and model of the guitar.
It is difficult to provide an exact number of Fender guitars that have been produced, as the company has been in business for over 70 years and has produced a wide variety of electric and acoustic guitars during that time. Fender is known for producing some of the most iconic and popular guitar models in the world, including the Stratocaster, Telecaster, and Jazzmaster, as well as a variety of other electric and acoustic guitars.
Fender has also produced limited edition and custom guitars, as well as reissues of classic models, which further complicates the task of determining an exact number of Fender guitars. It is safe to say that Fender has produced hundreds of thousands, if not millions, of guitars over the years.
Examine the overall construction and craftsmanship: Fender guitars are known for their high-quality construction and attention to detail. Look for signs of poor craftsmanship, such as rough or unfinished edges, misaligned parts, or sloppy paint jobs.
I bought what I thought was a Fender American Deluxe Jazz bass about a year ago on eBay but I had some suspicions about its authenticity from the very beginning. Like an idiot I chose not to complain or send it back, so I'm trying to determine if it's a fake or not.
One big issue that I have is that it was sent with a beat up Ibanez case and not a Fender case. I know it might not mean anything when it comes to the authenticity of the bass, but I thought it was more than odd since I can't imagine buying a bass like that and not getting a Fender case.
Also it doesn't play like Fender basses I'm used to, when I played it my first thought was "wow, I don't like this". Maybe it's the result of the year that it was made (1999) but the tone does nothing for me and I've always been a huge fan of Fender basses.
As a result of me not liking it I put it back up on ebay and I got a ton of responses claiming that it was a Mexican and not an American. Although that may be the result of me pricing it too cheap, so people immediately thought it was a Mexican.
Lastly, I checked out the serial number on Fender's website and the series of serial number checks out for the year that it was apparently made. But wouldn't it be just as easy for a counterfeit to make up a serial number and just use the numbering convention for that years model of Jazz bass?
I believe that the pickups on an MIA version from that year should have one large pole piece per string rather than the four sets of two per string. I don't think the MIM version from that era had that feature, but you might double check. (Assuming nobody replaced the pickups)
Each individual instrument has a tone of its own. I play a 1999 MIM Jazz that I bought because it sounded so clear and distinct unplugged. The MIAs all sounded dead compared to it. I bought it without even plugging it in and am still satisfied.
Check to see if the Jazz pickups are the different sizes(bridge should be a little bigger for MIA) and whether they are reverse wound. The MIM pickups in my '99 MIM are both the same size (they're neck pickups) and wound the same way so it is impossible to eliminate the single-coil hum through balancing the pickups. If you can make your Jazz quiet by adjusting the relative value of your pickups without having to touch the strings and if the pickups are different sizes you probably have an MIA Jazz.
I am not a Fender expert at all, but have you checked the serial number (Fender serial number lookup)? Also, is there another serial number on the reverse side somewhere? If there is, check this one also. But, generally, it is not good to have two serial numbers.
You may want to read through this also:
_why_fender_jazz_bass_have_a_2_different/
A Fender bass with the same serial number as visible on your headstock is mentioned in that thread. According to Fender this would indicate your bass is from around 1984-1987, but that seems unlikely (but not impossible) by the way it looks.
A first cautious conclusion would be that it is a counterfeit instrument. Getting a real Japanese-made Fender from the 80s for 200 bucks is probably too good to be true. But, again, check whether there is another serial number somewhere on the backside.
Here is a Fender Jazz Bass Special made in Japan in the 1980's. Bass is in great condition for its age. These guitars had the TBX tone circuit and everything works as its supposed to one this one. All original as far as I can tell. It's essentially a...
Yes, there are some differences. Paint in the truss rod hole seems to be missing and the nut is a different color, but those things could come from wear and tear. The price tag is not one of a guitar store, but of a pawn shop, so that does not give a good indication. Might be a lucky find after all.
ac__dc, the best provider of promotion! 4 strings duff mckagan precision guitar pearl white electric bass guitars skull engraved neck plate, black hardware has new red electric guitars and electric guitars semi hollow 335 for your choice. The black...
After using his backup bass for so long, it looked as if Roberto would soon have his number-one back. But, to our mutual chagrin, another issue soon reared its ugly head, keeping the long-suffering lovers apart a while longer.
Bushings are those little surrounds that act as a barrier between the tuner shaft and the bare wood, which are meant to protect the wood from wear while keeping the shaft upright against the tension of the strings. An unsung hero of tuning stability, these demure doughnuts are simple yet crucial components.
I hatched another plan. On the one day we allowed ourselves to go out and gather supplies, I visited a hardware store in search of veneer, specifically the thin kind used to line the forward-facing edge of shelves. Veneer can be found in many different types of wood but the store only had adhesive-backed red oak.
This type of veneer comes in handy around guitar repair shops. I use it most often to shim the gaps around a neck in a slightly oversized pocket. I thought it might be of use here to line the bushing holes. With any luck, Roberto would have his bass back in no time.
Next, I cut each strip to a length of 2.5 inches, slightly more material than I required to fill in the gap between the bushing and the headstock. I let my kettle heat up for the next step while I checked measurements.
Inspired by the way luthiers bend the sides of acoustic guitars, I decided to bend the veneer strips by placing them in a bowl with steaming-hot water, soaking them until I could bend them around my finger. It took some time for the wood to soften but soon it was malleable enough to shape without hassle.
I test-fitted each strip and trimmed to the appropriate length for full coverage, then inserted a bushing to check my work. Sure enough, each bushing fit snugly, so I used a hair dryer on a warm setting to dry the veneer in place.
I stuck each strip in place with Titebond II wood glue and reinserted the bushings. After installing the tuners and slapping on a set of La Bella flats, it brought me great pleasure to see that they were set firmly in place and functioned perfectly. Job done.
93ddb68554