ELECTROMAGNETIC INTERFERENCE (EMI) TEST RECEIVER
CBD
ELECTROMAGNETIC INTERFERENCE (EMI) TEST RECEIVER
Address : Contracts Group, Bldg 588, Mail Stop 32, Naval Air Warfare Center
Aircraft Division, Patuxent River, MD 20670-5304
Sol. no. : N00421-98-R-1145
Contact : Teri Berrian, Contract Specialist, 301-342-1825
Due : 07 Apr, 1998
SOL N00421-98-R-1145 DUE 040798 POC Teri Berrian, Contract Specialist,
301-342-1825 ext 184 WEB: NAVAIR Home Page, http://www.navair.navy.mil.
E-MAIL: williams_lorraine@PAX9@mr.nawcad.navy.mil,
berrian_teri%PA...@mr.nawcad.navy.mil. 59 -- ELECTROMAGNETIC INTERFERENCE
(EMI) TEST RECEIVER SOL N00421-98-R-1145 DUE 07 APR 98, POC Contract
Specialist, Teri Berrian (301) 342-1825 ext 184. D. Lorraine Williams,
Contracting Officer. E-Mail: Berrian_Teri%PA...@mr.nawcad.navy.mil. The
Naval Air Warfare Center Aircraft Division (NAWCAD) Patuxent River has a
requirement for procure one 20 Herts (Hz) to 26.5 Giga-Hertz (GHz) EMI
Test Receivers in accordance with the requirements contained in this
solicitation. This is a combined synopsis/solicitation for commercial
items prepared in accordance with the format in the Federal Acquisition
Regulation (FAR), Subpart 12.6, as supplemented with additional
information included in this notice. This announcement constitutes the
only solicitation; proposals are being requested and a written
solicitation will not be issued. Solicitation Number N00421-98-R-1145 is
issued as a Request For Proposal (RFP). The incorporated document and
provisions and clauses are those in effect through Federal Acquisition
Circular 90-46 and Defense Acquisition Circular 91-11. The Naval Air
Warfare Center Aircraft Division (NAWCAD), Patuxent River, MD proposes to
procure a Firm Fixed Price (FFP) Contract. Request for copies of the
solicitation must reference the entire solicitation number. Interested
parties must respond electronically via e-mail. All amendments shall be
sent electronically. All responsible sources solicited may submit a
proposal which shall be considered. No telephone request will be
accepted. The solicitation will be available over the Internet in Word
6.0TM format and will reside on the NAVAIR Home Page, located on the
World Wide Web (WWW). The WWW server may be accessed using client servers
such as MOSAIC and NETSCAPE. The WWW address, or URL, for the NAVAIR Home
Page is "http://www.navair.navy.mil/" (without quotations) and click on
"Business Opportunities" and "NAVAIR Washington DC Contracts." Interested
parties may identify their interest and technical capability by
submitting technical specifications to this respond and may submit
information which shall be considered by NAWCAD, Contracts Divisions. The
contract line items are as follows: CLIN 0001, 20 Hz to 26.5 GHz EMI Test
Receiver w/MIL-STD-461 Control Software, 1 Ea., The unit must meet the
following specifications. The Naval Air Warfare Center Aircraft
Division's Aircraft Information Security Branch's Electromagnetic
Interference (EMI) Laboratory conducts EMI testing on all avionics
systems in the Navy's inventory to the requirements of MIL-STD-462D.
Seventy percent of this testing requires the use of sophisticated EMI
test receiver. The laboratory's present test receiver is tailored to the
older requirements as detailed in MIL-STD-462A, B, and C. The new
requirements of MIL-STD-462D are particularly stringent in the area of
test receiver sensitivity. In an attempt to configure our present test
receiver to meet these requirements it increases our test time to an
unacceptable three hundred percent and in some frequency ranges is unable
to provide the sensitivity required by the new specification. In order to
meet the requirements of our test specification (MIL-STD-462D) a new EMI
test receiver, operational through the frequency range of twenty Hertz
to twenty six and a half Giga-Hertz, is required. A modern EMI test
receiver utilizing the latest in receiver technology will provide us with
the ability to reduce our test time to extremely reasonable levels as
well as meet the sensitivity requirements of MIL-STD-462D. This
specification establishes requirements for a 20 Hz to 26.5 GHz EMI test
receiver. This test receiver will be used by the Electromagnetic
Interference Laboratory to perform electromagnetic interference emissions
testing to the Test Method Standard MIL-STD-462D and previous revisions.
This EMI test receiver will be required to test electronic components
installed in a variety of Naval aircraft, ground support equipment,
medical equipment, and space systems. The system will be used in our
permanent test laboratory, the Aircraft AnechoicTest Facility (AATF),
conus, and abroad locations. This places a mandatory requirement of
compactness and mobility on this new EMI test receiver. The requirements
of the 20 Hz to 26.5 GHz EMI Test Receiver are as follows: Frequency
Range: 20 Hz to 26.5 GHz (Must be upgradeable to at least 100 GHz);
Control Features: Complete Stand Alone Control, IEEE 488.2 GPIB Control,
MIL-STD-462 Control Software (Microsoft Windows 3.11 and 95
Compatiable); Display: 9inch Color CRT CRT w/ 1024 x 512 pixel
resolution, Split Screen Display Capability, External monitor output;
Plotting / Printer: HP-GL, 24-pin pinwriter / dot matrix, laser printer;
Power Supply: 120VAC + 10%, 60 Hz; Dimensions: 435mm x 457 x 590mm, 68
kg, (W x H x D, Weight), 17.25inches x 18inches x 23.25inches, 150lb;
Demodulation: Amplitude and Frequency Modulation. Must be able to measure
modulation depth and frequency deviation.;Spectral Sensitivity: w/ out
pre amp 5 MHz and Sweep Time 10 dB = < 30 dB, 1 Watt, or 137 dBuV, Max
Pulse Spectral Density input with preselector on: W/ 0 dB attn and f <
150 kHz = < 130 dBuV/MHz. W/ 0 dB attn, 150 kHz to 1 GHz = < 90
dBuV/MHz, W/ 0 dB attn and f > 1 GHz = < 61 dBuV/MHz, Max Pulse
Spectral Density Input with preselector off: W/ 0 dB attn: < 60 dBuV,
Max Pulse Voltage: Input #1 = < 150 V, Input #2 = 10 dB: Input #1 =
1 kW for 10 us Pulse, Input #2 = 100 W for 10 us Pulse, Level
Compression, (Pulse Spectral Density at 1-dB Compression, 0 dB attn,
preselector on, and pre amp off): < 150 kHz = > 110 dBuV/MHz, 150
kHz to 5 MHz, = > 86 dBuV/MHz, 5 MHz to 30 MHz = > 80 dBuV/MHz, 30
MHz to 300 MHz, = > 76 dBuV/MHz, 300 MHz to 1000 MHz = > 75
dBuV/MHz, 1000 MHz to 26.5 GHz= > 50 dBuV/MHz; Sensitivity, Max: 2 MHz
to < 20 MHz = -35 dBuV 20 MHz to 200 MHz = -40 dBuV; Interfaces:
External Floppy, RS-232-C (25 pin female), Parallel Interface (Centronics
36 pin female), Head Phone Jack; Software, Must operate in Microsoft
Windows 3.11 or higher. Must contain specification limits for
MIL-STD-461D, MIL-STD-461C, and MIL-STD-461B. Must allow operator input
of transducer factor files. Must provide an overview mode coupled with
the ability to input criteria for receiver quality measurements. It is of
extreme importance that this product be able to meet these specifications
without exceeding a maximum of two units contained within the specified
dimensions. Mobility from one test location to another is very important
to the laboratory's test capability. Inspection and acceptance shall be
made at destination. The contractor shall extend to the Government full
coverage of any standard commercial warranty normally offered in a
similar commercial sale. Acceptance of the warranty does not waive the
Government's rights under the Inspection clause, nor does it limit the
Government's rights with regard to the other terms and conditions of this
contract. In the event of a conflict the terms and conditions of the
contract shall take precedence over the warranty. The warranty period
shall begin upon final acceptance of the applicable deliverable listed in
the schedule. FAR 52.212-1 Instructions to Offerors -- Commercial Items
(OCT 1995) is incorporated by reference and applies to this acquisition.
The provision at 52.212-2 Evaluation -- Commercial Items (OCT 1995) does
not apply to this acquisition. The offeror shall provide backup
information verifying the price offered; e.g. a copy of current catalog,
invoices for the same equipment, etc.. A written notice of award or
acceptance of an offer, mailed or otherwise furnished to the successful
offeror within the time for acceptance specified in the offer, shall
result in a binding contract without further action by either party.
Before the offer's specified expiration time, the Government may accept
an offer (or part of an offer), whether or not there are negotiations
after its receipt, unless a written notice of withdrawal is received
before award. Each offeror shall include a completed copy of the
provision at FAR 52.212-3, Offeror Representations and Certifications --
Commercial (OCT 1995) with its proposal. FAR 52.212-4 Contract Terms and
Conditions -- Commercial Items (OCT 1995) is incorporated by reference
and applies to this acquisition. The clause at 52.212-5 Contract Terms
and Conditions Required to Implement Executive Orders -- Commercial Items
(JAN 1996) is incorporated by reference, however, for paragraph (b) only
the following clauses apply to this acquisition: 52.203-6, Restrictions
on Subcontractor Sales to the Government, with Alternate I (41U.S.C.
253g and 10 U.S.C. 2402), 52.203-10, Price or Fee Adjustment for Illegal
or Improper Activity (41 U.S.C. 423). 52.204-6, Contractor
Identification Number -- Data Universal Numbering System (DUNS) Number
(DEC 1996), 52.219-8, Utilization of Small Business Concerns and Small
Disadvantaged Business Concerns (15 U.S.C. 637 (d)(2) and (3)),
52.219-14, Limitation on Subcontracting (15 U.S.C. 637(a)(14)),
52.222-26, Equal Opportunity (E.O. 11246), 52.222-35, Affirmative Action
for Special Disabled and Vietnam Era Veterans (38 U.S.C.4212),
52.222-36, Affirmative Action for Handicapped Workers (29 U.S.C. 793)
52.222-37, Employment Reports on Special Disabled Veterans and Veterans
of the Vietnam Era (38 U.S.C. 4212). Additionally, each offeror shall
include a completed copy of Defense FAR Supplement (DFARS) provision
252.212-7000, Offeror Representations and Certifications -- Commercial
Items (NOV 1995). DFARS Clause, 252.212-7001, Contract Terms and
Conditions Required to Implement Statutes or Executive Orders Applicable
to Defense Acquisitions of Commercial Items (NOV 1995) is incorporated
by reference, however, for paragraph (b) only the following clauses
apply: 252.225-7001, Buy American Act and Balance of Payment Program (41
U.S.C. 10, E.O. 10582), 252.225-7007, Trade Agreements (10 U.S.C.
2501-2582), 252.225-7012, Preference for Certain Domestic Commodities,
252.233-7000, Certification of Claims and Requests for Adjustment or
Relief (10 U.S.C. 2410). Offers are due to Teri Berrian, Code
25522R,Contract Specialist, Naval Air Warfare Center Aircraft Division,
Building 588, Unit 2, 47253 Whalen Road, Patuxent River, MD 20670-1463 by
2:30 P.M. Eastern Standard Time, 07 APR 1998. For information regarding
this solicitation or copies of FAR provision 52.212-3 and DFARS provision
252-212-7000, via phone (301) 342-1825 x 184, Fax (301)
342-1531/1864/1847. (0075)
CBD
ELECTROMAGNETIC INTERFERENCE (EMI) TEST RECEIVER
Address : Contracts Group, Bldg 588, Mail Stop 32, Naval Air Warfare Center
Aircraft Division, Patuxent River, MD 20670-5304
Sol. no. : N00421-98-R-1145
Contact : Teri Berrian, Contract Specialist, 301-342-1825
Due : 07 Apr, 1998
SOL N00421-98-R-1145 DUE 040798 POC Teri Berrian, Contract Specialist,
301-342-1825 Ext 184 WEB: NAVAIR Home Page, http://www.navair.navy.mil.
E-MAIL: berrian_teri%PA...@mr.nawcad.navy.mil,
berrian_teri%PA...@mr.nawcad.navy.mil. The Naval Air Warfare Center
Aircraft Division, Patuxent River, Maryland announces its intention to
modify Submission 179100 dated March 16, 1998 by including the following
information: The synposis/solicitation will be posted on the NAVAIR Home
Page within five (5) days after release in the CBD notice. The WWW
address or URL, for the NAVAIR Home Page is "http://www.navair.navy.mil/"
and click on "Business Opportunities" scroll down to "Naval Air Systems
Command -- Patuxent River, MD -- Contracts" then click on "Open
Solicitations". The closing date is 07 APR 98. The point of contact is
Ms. Teri Berrian at (301) 342-1825 Extension 184. (0076)