CIRCUIT CARD ASSY
CBD
CIRCUIT CARD ASSY
Address : Wr-Alc/Lfk, 296 Cochran St, Robins Air Force Base Ga 31098-1622
Sol. no. : F09603-98-Q-21268
Contact : For copy, WR-ALC/PKXOC include mfg code, For additional
information contact Dawn M.
Due : 04 May, 1998
SOL F09603-98-Q-21268 DUE 050498 POC For copy, WR-ALC/PKXOC include mfg
code, For additional information contact Dawn M.
Harden/Lfkb/[912]926-4608 Item 0001 NSN 5998-01-424-5106XZ P/N: 5125460,
Radar Signal Processor A9 Dual Signal Processing Circuit Card Assy
Approx 5"X10"X1/2" Metal Alloys Fiberglass Composite. 1ea. Applicable to:
F-15. Destn: DIS002. Delivery: 30 JUN 98 1 ea Item 0002 NSN
5998-01-424-5108XZ Circuit Card Assy P/N: 5125470, RADAR SIGNAL PROCESSOR
A8 SMPE CIRCUIT CARD ASSY APPROX 5"X10"X1/2" METAL ALLOYS FIBERGLASS
COMPOSITE. 2ea. Applicable to: F-15. Destn: DIS002. Delivery: 30 JUN 98
2 ea Item 0003 NSN 5995-01-434-1082XZ Cable Assy, Rad P/N: 5128619, CABLE
WRAP ASSY FOR APG-70 3173031-125 RADAR ANTENNA PROVIDES INTERCONNECT FROM
ANTENNA TO GIMBAL APPROX 4"X2" FIBERGLASS ALLOYS. 3ea. Applicable to:
F-15. Destn: DIS002. Delivery: 30 JUN 98 3 ea FAX# 912-926-7572. FMS
REQUIREMENT. The approximate issue/response date will be 03 Apr 98. To:
Hughes Aircraft Co, Los Angeles Ca 90080-0028. No telephone requests.
Only written or faxed requests received directly from the requestor are
acceptable. All responsible sources solicited may submit a bid, proposal,
or quotation which shall be considered. Authority: 10 U.S.C. 2304(C)(1),
Justification: Supplies (or Services) required are available from only
one or a limited number of responsible source(s) and no other type of
supplies or services will satisfy agency requirements. All potential
offerors should contact the buyer/PCO identified above for additional
information and/or to communicate concerns, if any, concerning this
acquisition. If your concerns are not satisfied by the contacting
officer, an Ombudsman has been appointed to hear serious concerns that
are not resolved through established channels. The purpose of the
Ombudsman is not to diminish the authority of the program director or
contracting officer, but to communicate serious contractor concerns,
issues, disagreements, and recommendations to the appropriate government
personnel. When requested, the Ombudsman will maintain strict
confidentiality as to the source of the concern. The Ombudsman does not
participate in the evaluation of proposals or in the source selection
process. When appropriate, potential offerors may contact Ombudsman James
Grant, Chief, Contract Policy Division, at 912-926-2604. Please be
prepared to identify previous contacts made by you in an attempt to
resolve your concerns. See Note (s) 22,26. (0075)