new member
1 view
Skip to first unread message
Matt
Apr 20, 2010, 12:38:46 PM4/20/10
to New England RepRap
Hi,
Just wanted to introduce myself to the group.
I'm new to 3-d printing, but have been interested in it for several
years. Now I finally have an excuse to get more acquainted with the
technology.
I work in the low vision rehabilitation laboratory at Schepens Eye
Research Institute, and in my spare time for a startup called
HumanHuman Technologies Inc., we develop novel human-computer
interfaces and are located in Somerville, MA.
Matt Bronstad
--
You received this message because you are subscribed to the Google Groups "New England RepRap" group.
To post to this group, send email to new-engla...@googlegroups.com.
To unsubscribe from this group, send email to new-england-rep...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/new-england-reprap?hl=en.
Just wanted to introduce myself to the group.
I'm new to 3-d printing, but have been interested in it for several
years. Now I finally have an excuse to get more acquainted with the
technology.
I work in the low vision rehabilitation laboratory at Schepens Eye
Research Institute, and in my spare time for a startup called
HumanHuman Technologies Inc., we develop novel human-computer
interfaces and are located in Somerville, MA.
Matt Bronstad
--
You received this message because you are subscribed to the Google Groups "New England RepRap" group.
To post to this group, send email to new-engla...@googlegroups.com.
To unsubscribe from this group, send email to new-england-rep...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/new-england-reprap?hl=en.
Jeff Keegan
Apr 20, 2010, 1:44:26 PM4/20/10
to new-engla...@googlegroups.com
Welcome!--
/=====================================================================\
| Jeff Keegan == jke...@keegan.org == http://www.keegan.org/jeff |
\=====================================================================/
/=====================================================================\
| Jeff Keegan == jke...@keegan.org == http://www.keegan.org/jeff |
\=====================================================================/
TC
Apr 27, 2010, 7:53:41 PM4/27/10
to New England RepRap
Matt,
I'm not too far away from you (Merrimack Valley area). I'm working on
a Mendel build now. Slow going but committed to the project.
TC
I'm not too far away from you (Merrimack Valley area). I'm working on
a Mendel build now. Slow going but committed to the project.
TC
Thomas Charron
Apr 28, 2010, 9:23:20 AM4/28/10
to new-engla...@googlegroups.com
On Tue, Apr 27, 2010 at 7:53 PM, TC <todd....@gmail.com> wrote:
Matt,
I'm not too far away from you (Merrimack Valley area). I'm working on
a Mendel build now. Slow going but committed to the project.
Hey TC,
How are you building your Mendel?
--
-- Thomas
Matt Bronstad
Apr 28, 2010, 9:54:43 AM4/28/10
to new-engla...@googlegroups.com
Hi Thomas,
Let me introduce my co-founder Dave Thomas. I forwarded your message to him as he is our lead technical person. We'd be very interested in talking to you about your experience building the Mendel.
thanks,
Matt--
Matt Bronstad, Ph.D.
Postdoctoral fellow
Schepens Eye Research Institute
Let me introduce my co-founder Dave Thomas. I forwarded your message to him as he is our lead technical person. We'd be very interested in talking to you about your experience building the Mendel.
thanks,
Matt
Matt Bronstad, Ph.D.
Postdoctoral fellow
Schepens Eye Research Institute
TC
May 3, 2010, 8:01:46 PM5/3/10
to New England RepRap
RE: my Mendel build
I have access to a 3D printer at work so I can print parts if I need
to. But I'm also looking at buying parts to speed things along.
It might seem backwards, but I'm working on software, electronics, and
motors first (I'm collaborating with someone else). Then I'm going to
focus on mechanical items. And then finally, I'll focus on the plastic
bits. This is partly because I can get more help later, but not near
term, on the mechanical and plastic parts.
TC
On Apr 28, 9:23 am, Thomas Charron <twaf...@gmail.com> wrote:
I have access to a 3D printer at work so I can print parts if I need
to. But I'm also looking at buying parts to speed things along.
It might seem backwards, but I'm working on software, electronics, and
motors first (I'm collaborating with someone else). Then I'm going to
focus on mechanical items. And then finally, I'll focus on the plastic
bits. This is partly because I can get more help later, but not near
term, on the mechanical and plastic parts.
TC
On Apr 28, 9:23 am, Thomas Charron <twaf...@gmail.com> wrote:
Reply all
Reply to author
Forward
0 new messages