Fl30 Pressure Tank

[Rut]

TheFL30 12v diaphragm water pump with low pressure at 17 PSI is specially designed to suit your motor home, caravan or campervan where low pressure is required to suit the hot water service. This very popular 12v diaphragm pressure pump will deliver 9.3 litres per minute which will give you a great shower and ample water for the kitchen sink. Automatic water pump providing water at pressure when you turn the tap on and off. Designed for intermittent use of up to 20 minutes at a time.

It is recommended that diaphragm style pressure pumps be used with an accumulator tank in the system for quieter operation, to reduce hammering and pump cycling and to lengthen the life of both your pump and your battery when used in a pressurized set-up.

You have peace of mind when you purchase with your product backed with a fair dinkum Australian warranty from a 100% Australian owned business. We stand by our products and offer full phone support 7 days a week to help in your decision making to get the best product to suit both your budget and your application. We listen to our customers and continually strive to improve our service and the price, quality and durability of all our products. We stock spare parts and we welcome your feedback!

We accept Credit and Debit Cards, Direct Bank Deposit, Paypal or Stripe as payment for goods. Afterpay is available as an option when you choose Stripe. You will be given an option to select the method of payment at Checkout.

Deliveries for large and bulky orders, together with orders to more remote parts of Australia may be subject to additional freight charges. Although we try to absorb these additional costs, there are circumstances where the cost cannot be absorbed. If this occurs we will phone you for the payment of the additional fee or give you the opportunity to cancel the order and receive a full refund if you choose not to proceed with the order.

Your order will be sent with a tracking number which will be emailed to you when your order is dispatched. Your order will require a signature on collection unless you request otherwise. This provides added protection for your order.

If there is an additional fee required to dispatch your order, you will be contacted to either pay the additional fee, or given the opportunity to cancel the order for a full refund if you choose not to proceed with the order.

Deliveries to non-metropolitan locations within Australia may be subject to additional freight charges. If there is an additional fee required to dispatch your order, you will be contacted to either pay the additional fee, or given the opportunity to cancel the order for a full refund if you choose not to proceed with the order.

Escaping Outdoors use Australia Post, Direct Freight, Fastway Couriers, Transdirect, Couriers Please and TNT choosing the best courier for your area. The courier is also determined by the weight and size of the order. EG: Australia Post will not carry postage articles over 22kg.

When your order is processed you will be sent an email with a tracking number and the courier company chosen so you can track your order. Your order will require a signature on collection unless you request otherwise. This provides added protection for your order.

During the checkout process if your product is able to be shipped express post, the option to pay a further $15 can be seen in the shipping tab and can be ticked to apply the express post option. Express post is not available for multiple items during the checkout process. If you have multiple items and require expedited shipping, please contact us for any additional costs.

Water Pumps Now products are shipped within 24 hours of receiving your cleared funds with an expected delivery to you after leaving our warehouse of 2-7 business days. We use Australia Post or the courier that best services your area. Please ensure your address is correct or there may be a delay or extra charge for resending your goods.

A large number of our lighter products have can be shipped with Australia Post Express Post. (Please refer to express post options above). If your order is urgent and does not have the express post option in the cart, please phone to organise expedited shipping. Extra charges may apply.

If the address you provided in your order is undeliverable or incorrect, you will be responsible for the cost of shipping to the revised address. We will contact you to obtain a correct address and approval for the additional shipping charge. If you choose not to have the order delivered again, we will refund your purchase price, less a 15% restocking fee and our shipping cost.

The FL-30 pump is specifically designed for low water consumption use. They are ideal where the capacity of the water holding tank is minimal, as it provides all the convenience of pressured water, without the wastage often associated with high pressure/high flow pumps.

When the pressure drops below 40 psi a pressure switch activates the water pump system. The submersible water pump pumps water into the pressure tank until normal pressure is reached and the pump automatically shuts off. A safety valve installed on the pressure tank is designed to release pressure should it exceed 75 psi. Click video on right for a demonstration of the pump cycle process.

We have believed for years that the best items to recommend to our customers are products that are time proven and are commonly available to the trade. We recommend items such as Franklin motors and control boxes, Square D pressure switches, Flomatic check valves, and top pump brands that are locally available in New England.

We do this for two reasons, the first is that the parts are not proprietary, so in the event we are not available to work on your system, many others can. The second is that these top performing products allow us to offer long warrantee periods on our installations because of the demonstrated long service life.

A submersible water pump is comprised of a series (usually 10) of small impellers, stacked horizontally on top of each other. When activated, the impellers rotate at approximately 3,450 RPM moving the well water up the drop line and into the pressure tank. Because the water pump operates electrically, wires must run down into the well and be connected to the pump. All wiring connections are permanently sealed to avoid voltage leaks and short circuits. A torque arrester and cable guards are installed above the pump to prevent wires from twisting and chafing during pump operation. The torque arrester extends the life of the pump by preventing voltage leaks and short circuits that would be caused if the wire coatings were compromised.

Most systems installed in our trade are designed for a service life of a minimum 7 years, however we design for a 15-20 year life before maintenance is needed. While water quality can affect the length of service life, properly sized quality components installed properly can significantly increase service life.

While we have utilized 19 pound per foot well casings for many years, many in the industry have used less thick casings. In 2019 alone, we replaced the top portion of lighter wall casings on existing wells on over a dozen wells due to rusted out casing allowing surface water to contaminate the well. These wells were rehabilitated by exposing the top eight feet of casing from grade and replacing it in total in lieu of total well replacement. We also extend wells that have the pre-1970 buried well heads and bring them up to code and solve contamination from surface water sources.

Plastics developed in the 1970s and 1980s were developed with an estimated life span of 40-50 years. We have found the polymer in these plastics fail and cause leaks. Commonly this is noticed with cracking of the pipe as it becomes brittle; this happens literally in a few weeks time once the polymer fails. Replacement of the piping down hole and horizontal run from well to house has become more common in the past few years.

Cushing and Sons can preform inspections of water systems. We call it a PCU. Be it for peace of mind, suspected problem, or for property sale; we can check out the system with a complete report. Inspection of the well head, static level, condition of the wiring, pressure tank, pump cycle time, pump wire continuity, amperage draw, and related items is done and suggestions for repair or upgrades are given. Additional services such as water quality testing, system disinfection, and quantity pump testing can also be performed.

3a8082e126