Manuals

[phil...@cgfsv1.dec.com]

Can anybody help me locate a Technical Reference Manual for an AT&T 6300
PC and possibly a programmers manual. I've checked with the local stores
but even though these manuals are listed they seem unable to obtain them.
Thanks in advance for any help you can offer.....Jim

[shields]

Has anyone used this product from Fox and Geller? There
was an ad in a recent Byte, and it looks intriguing because it
claims to be faster than Clipper, and yet retains the power of
the dot-prompt interactive mode. It is also cheaper than Dbase III+
at $395 vs $595 retail. Any comments or suggestions as to where to
get it would be appreciated. I tried PC Connection, and some other
places, but had no luck.
Thanks in advance,
Tom Shields

[Thomas Hjellming]

/ hpcnof:net.micro.pc / phil...@cgfsv1.dec.com / 8:08 pm Nov 3, 1986 /

----------

Jim,

I've had my AT&T6300 Programmer's Guide and Technical Reference
Manuals for about one year now. I found the Programmer's Guide in a
CompuShop in Phoenix, when I lived there. I bought the Technical Reference
manual (the one with schematics) through AT&T's National Parts Service
(sorry, I don't have the number -- but it is an 800 number). Each manual
costs ~$65 but that was a year ago.

I hope that helps.

Tom Hjellming
Colorado Networks Division
Hewlett-Packard
...!hplabs!hpfcla!hpcnof!thj

[Neal Pollack]

In article <62...@decwrl.DEC.COM> phil...@cgfsv1.dec.com writes:
>Can anybody help me locate a Technical Reference Manual for an AT&T 6300
>PC and possibly a programmers manual. I've checked with the local stores
>but even though these manuals are listed they seem unable to obtain them.

We have both the software tech ref. (basically the ms-dos programmers
guide) and the hardware reference manual. We ordered the Hardware
reference direct from A.T. & T.

The hardware technical reference, complete with schematics, is:

ComCode: 403319023 ATTIS MAN: 245450105IS
Titled: Reference Manual, AT&T Personal Computer 6300

AT&T Parts ordering is at 800-222-7278
AT&T Software & Tech Support is at 800-922-0354

I do not remember the price. Good Luck.

[SCHEUTZOW,MICHAEL J]

>Can anybody help me locate a Technical Reference Manual for an AT&T 6300
>PC and possibly a programmers manual. I've checked with the local stores
>but even though these manuals are listed they seem unable to obtain them.

All manuals can be ordered from AT&T directly, usually for about $65.
(The information found in these manuals is well worth the cost). The
toll free number is:
(800) 432 6600

Mike Scheutzow UUCP: gt6...@gitpyr.uucp
Georgia Tech ARPA: gt6...@pyr.ocs.gatech.edu