Elite Console partial recap help

[tiz...@yahoo.it]

Hallo, i'm thinking to make a partial recap of my Elite console, i'm not a tech but i can solder/desolder properly. The list of capacitor that i found necessary is below, i would like to have your opinion and tips, i add also a photo of my channel. Thank you 

1. MIC PRE (CRITICAL – UPPER MODULE)
C113
C121
C127
C100
C101

2. AUDIO COUPLERS (UPPER)
C104
C105
C106
C107
C108
C109
C110
C111
C112

3. EQ SECTION (UPPER)
C114
C115
C116
C117
C118
C119
C120

4. LOCAL POWER SUPPLY (UPPER)

C122
C123
C124
C125

±15V filtering

5. BUFFER / LINE AMP (UPPER)

LINE IN AMP section
C126
C128
C129

6. LOWER MODULE (FADER / OUTPUT / BUS)
C201
C202
C203
C204
C205
C206
C207
C208
C209

[ik...@zimbelaudio.com]

My advice would be to leave it alone. That looks like a late-build module in near perfect condition. Neotek consoles are not at all subject to cap degradation because they do not produce much heat (which is what damages the caps) at all. And, they used good quality, long-lasting caps to begin with.

Leave it alone and get back to mixing music. Please.

~Ike Zimbel~

   Wireless frequency coordination specialist.

   Manufacturer's Representative

   Radio Active Designs (Canada)

       ~416-720-0887~

FCC:WRBX645

   http://www.zimbelaudio.com/wireless-frequency-coordination/

 

---

From: 'tiz...@yahoo.it' via Neotek <neote...@googlegroups.com>
Sent: May 6, 2026 5:29 AM
To: Neotek <neote...@googlegroups.com>
Subject: [Neotek] Elite Console partial recap help

 

--
You received this message because you are subscribed to the Google Groups "Neotek" group.
To unsubscribe from this group and stop receiving emails from it, send an email to neotekusers...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/neotekusers/9724caf3-64c3-44f1-9a39-ef7f753d229cn%40googlegroups.com.

[Le Cowboy Studio]

I was going to say « talk to Ike before doing anything ».

He replied.

I would trust this guy,

-with my wife

-in bed

-naked

😅

Have fun!

Robby Bolduc

514-588-0818

Le 6 mai 2026 à 05:29, 'tiz...@yahoo.it' via Neotek <neote...@googlegroups.com> a écrit :

Hallo, i'm thinking to make a partial recap of my Elite console, i'm not a tech but i can solder/desolder properly. The list of capacitor that i found necessary is below, i would like to have your opinion and tips, i add also a photo of my channel. Thank you 

<IMG_0592.jpeg>

--
You received this message because you are subscribed to the Google Groups "Neotek" group.
To unsubscribe from this group and stop receiving emails from it, send an email to neotekusers...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/neotekusers/9724caf3-64c3-44f1-9a39-ef7f753d229cn%40googlegroups.com.

<IMG_0592.jpeg>

<IMG_0594.JPG>