SAAG
32 views
Skip to first unread message
Grahame
Jan 6, 2020, 9:48:19 AM1/6/20
to neonixie-l
^_^ SAAG
The current design is aimed at tubes with the voltage requirements of a
2BP1 CV3678 they turn up on Ebay regularly. CRTs requiring about 1kV
final acceleration voltage should be fine.
The design is based on a self contained CRT driver "block" connected by
a serial bus (I2C) back to a master controller. You should be able to
add up to 32 (!) modules to the bus but I guess 4 or 6 would be the
norm. A bit like a smart socket in some regards.
Continued work on the prototype is delay by (a) moving house (b) fitting
out a new workshop (c) completing the dekatron clock.
Grahame
The current design is aimed at tubes with the voltage requirements of a
2BP1 CV3678 they turn up on Ebay regularly. CRTs requiring about 1kV
final acceleration voltage should be fine.
The design is based on a self contained CRT driver "block" connected by
a serial bus (I2C) back to a master controller. You should be able to
add up to 32 (!) modules to the bus but I guess 4 or 6 would be the
norm. A bit like a smart socket in some regards.
Continued work on the prototype is delay by (a) moving house (b) fitting
out a new workshop (c) completing the dekatron clock.
Grahame
Reply all
Reply to author
Forward
0 new messages