MakerGear is Hiring
61 views
Skip to first unread message
Rick Pollack
Sep 7, 2011, 5:42:27 PM9/7/11
to neo-m...@googlegroups.com
MakerGear has an immediate opening (full time, part-time or temporary) for an individual with:
Expert soldering skills
Expert crimping and cable preparation skills
General machining skills (drill press, band saw, lathe, mill, etc).
-Must be motivated
-Must be able to solve problems
-Must have good hand eye dexterity
-Must be able to cut, count and measure
-Must be able to stand or walk for up to 8 hours
-Experience using micrometers and calipers is essential
-Ability to follow verbal and written instructions
-Must possess reasonable organizational and communication skills.
-Must possess excellent mechanical aptitude and above average hand dexterity.
-Must be able to lift up to 60 lbs.
Send resume to jo...@makergear.com
Expert soldering skills
Expert crimping and cable preparation skills
General machining skills (drill press, band saw, lathe, mill, etc).
-Must be motivated
-Must be able to solve problems
-Must have good hand eye dexterity
-Must be able to cut, count and measure
-Must be able to stand or walk for up to 8 hours
-Experience using micrometers and calipers is essential
-Ability to follow verbal and written instructions
-Must possess reasonable organizational and communication skills.
-Must possess excellent mechanical aptitude and above average hand dexterity.
-Must be able to lift up to 60 lbs.
Send resume to jo...@makergear.com
Reply all
Reply to author
Forward
0 new messages