Win10xpe Iso Download
Marthe Bernskoetter
Equipment Configuration: Control Point Tablet/Laptop > WiFi > Control-PC > 1m SUPRA Cat 8 Ethernet Cable > Audio-PC > 3m Chord C-USB Cable > Topping D90SE > 1m Chord Chameleon Plus XLR cables with Neutrik connectors > Topping A90 Discrete > 2m Mogami NEGLEX XLR cables with Neutrik connectors > March Audio P501 Monoblocks with Purifi 1ET7040SA modules > DIY speaker cables (Tycab PVC doubly insulated 11 AWG OFC wire, TechFlex braid, Neotech Banana/Spade connectors) > Bryston PX-1 external crossovers > DIY speaker cables (as before) > Bryston Model T Signature Speakers. AC power filtered/cleaned via Thor A12BF Smart Power Board.
I really don't know what happened, but today I tried Bootice again and the current system tab worked just fine, confirming my settings were all applied. Bcdedit still gives me an error about finding the bootloader for whatever reason, but no issue. Anyway, disregard my previous comment, and thank you for getting me to try Bootice in WinPE again!
There is another alternative method of loading a Win10XPE in RAM, it consists of leaving the Flatboot VHD, installing the SVBUS driver v2 "signed" that can be downloaded in reboot.pro or github, following the instructions described in "readme.txt" and then copy it to a USB pen and install Grub4dos on it. You can load it into RAM with the command "map --top --mem". The only drawback is that G4D DOES NOT WORK on EFI systems (yes ON UEFI/CSM) or GPT partitions (only in MBR) for that I would need Grub4 EFI and there I cannot help since I have no experience.
There's really not much I'd like to add, not sure if you're OK with getting TIDAL off the Audio PC or otherwise. In addition, it's also necessary to find out whether you're unfolding MQA somewhere or not.
Basically we could use anything similar to Kazoo as long as TIDAL integration is supported, it could be running on Android / iOS / Windows while we're streaming TIDAL to the UPnP / DLNA renderer that's running on the Audio PC with support for WASAPI / ASIO
Thanks for your detailed posts about reducing WinPE further. I get WinPE to work following samotc's guide in the first post and get audio to work just fine. I then tried to take it a step further to reduce the footprint by following what you recommended in your last 2 posts but mainly from "Part 2 of creating and modifying/optimizing Win10PE for audio".
I then built the wim & iso and using Rufus, wrote the iso to a flash drive. When booting from the flash drive, after the initial loading, the Windows logo is displayed and the spinner below it is displayed for a couple of seconds.
The screen then goes blank and I get a message box with the title bar displaying: "Sign-in process initialization failure" and an error message displaying: "Interactive sign-in process initialization has failed.". Any clue what could be causing this? Any pointers to solve this from you or anyone else would be much appreciated!
Good time everyone. Thanks for the answers and help with my questions. Ported all programs to win 10xpe, except RegistryChangesView, UltraISO. I thought that all manipulations should be performed in win 10XPE or Strelec. Thank you very much for unsubscribing. Having problems creating the VHD. All manipulations for creating VHD and changing BSD need to be done only from the main system. When creating flat boot with win10xpe and strelec, many features are stripped down. BCD editing without the main system is not possible. I think for beginners, it should be mentioned that all settings need to be made from under the main system. I want to mention, I ran into the difficulty of editing the system BCD, when booting, two systems appeared in the menu: win10 and win10pe. When I click win10pe, the system went to reboot. From the samotc instruction, when creating a VHD, a folder was created in the root directory (vhd), and when editing the BCD system, a link was only to the file (/win11xpe.vhd). This nuance is not mentioned in the instructions. I do not know why the instructions say without specifying the directory and how win11xpe could be loaded at the same time. After registering the full path to the file in my case (\ vhd \ win10xpe.vhd) only then win10xpe was able to boot. I wrote it so that non-experienced users could avoid this error. I would like the author to add clarifications to these points in his instructions. You can also mention the procedure for creating a separate profile for the BCD system, a very handy necessary thing ... Not quite figured out why you need to edit Other BCD file ... What does this editing give? 1) It was not possible to tighten the screen brightness control and for some reason the Ethernet connection does not work correctly. It is especially important to set up your internet connection. 2) How to correctly install the sound card driver and (DAC_Asio)? With great respect to the author, special thanks to internethandle and the forum participants.
It is by far the best OS I have tried, I had many times doubts between RAMDISK CORE 2019 and WTFPlay, but between Win10XPE and WTFPlay there is no color, it is very much superior to win10XPE, at least on my system, I cannot comment on another.