navx-mxp

Thank You! We were planning on just buying some pre-installed on breakout boards from adafruit, and

Well, after many returns of 0.0 it just returned 3.1. Go figure. Next question, why just 3.1 and not

Is there a page that details the firmware and software release notes?

Hi Michael, First, I wanted to review w/you the navX-Micro communication model with a CDIM, and how

Yes, getActualUpdateRate() is the actual clockrate used to generate data samples. It is not

Do you have any new information on this topic you can share with the community? Thanks, - scott

The navX-MXP Software Archive has been updated to correctly reference the 2017 releases, both the

Last night I was working with an FTC team here on Kauai, their robot features a Rev Expansion Hub,

Hi Alex, I wanted to update you on progress. Kauai Labs today released an updated navX-MXP/navX-Micro

Hmm, not aware of anything for navX-Micro using Simulink/Matlab. Wrapping the C++ seems like a

Hi Alex, The navX-Micro can be powered via 3.3V source, so the level shifter is not strictly required

Yes, that's exactly correct. When using the new SensorKLNavxMicro class, the Kauai Labs navx_ftc

Hi Michael, I'm not clear on what the symptom you are seeing is, and what the reproducible

I am trying to do SLAM(for localization & path planning of my robot autonomously) on my robot...

Support for running the LabVIEW libraries on MyRIO is available at Studica, who has developed these

When I tested the program with the .close() method call removed, it couldn't connect to the navx

Hi Chris, There is an example, named SensorKLNavxMicro.java, which appears to show how to use this

Hello and thanks for your help. I'm not familiar with exactly what needs to happen here since I

So I moved the usb cable to the Micro to port 1 on the RoboRio and put all of the cameras on the usb

What programming language are you using?

Yes, that code works. I tested by printing values at 200Hz while wiggling the sensor.

I've had a similar bug - when communicating over SPI the NavX fails to initialize correctly (all

To get instantaneous Y axis acceleration in body reference frame, use getRawAccelY(). The world

Hi Chester, There's a new build (3.0.327), this should alleviate the issues w/the CRC errors

If it's an angular tilt you want to measure, then the "roll" angle will provide helpful

What kind of motion are you wanting the robot to make? I'd expect you will need to first move to

HI - thanks for the quick response. We will check the code. Just one note. Another way that we can

For FTC, the firmware you have is fine; the new revision of firmware has some FRC-specific features

In 3 years you're the first to ever complain. :) Currently there's no way to disable the

Re-installing with admin didn't work. Installing the Visual C++ 2005 runtime did work. I didn