Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Re: Can PXI-2529 support negative voltages?
2 views
Skip to first unread message
G Lo
Jul 18, 2008, 1:10:17 PM7/18/08
to
ChrisNagy,
From the <a href="http://www.ni.com/pdf/manuals/373649h.pdf" target="_blank">PXI-2529 specifications</a>, it explains that the channel to channel voltage difference, as well as the channel to ground difference, cannot excede 150V. Polarity is not an issue here because we are dealing with the difference between lines. Make sure to take both channel to channel and channel to ground specifications into account or arcing can occur. Also, keep in mind that the channel to channel difference specification applies to all lines on the board and not just the lines being routed. Hope this helps! :smileyhappy:
From the <a href="http://www.ni.com/pdf/manuals/373649h.pdf" target="_blank">PXI-2529 specifications</a>, it explains that the channel to channel voltage difference, as well as the channel to ground difference, cannot excede 150V. Polarity is not an issue here because we are dealing with the difference between lines. Make sure to take both channel to channel and channel to ground specifications into account or arcing can occur. Also, keep in mind that the channel to channel difference specification applies to all lines on the board and not just the lines being routed. Hope this helps! :smileyhappy:
ChrisNagy
Jul 18, 2008, 1:40:14 PM7/18/08
to
Thanks for the clarification, it did help.
---CJN
0 new messages