Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
How to check PCMCIA-DNET cable
0 views
Skip to first unread message
bzielinski
Aug 10, 2004, 2:00:25 PM8/10/04
to
I'm wanting to check the cable provided with the PCMCIA-DNET card to
see if it is functioning properly. What is the procedure for this.
see if it is functioning properly. What is the procedure for this.
Craig H.
Aug 19, 2004, 4:03:32 PM8/19/04
to
bzielinski,
Probably the best way to check the cable would be to connect a device
up and see if you can talk to it (like with a simple who). Are you
having problems in your application that might lead you to believe
that the cable is bad?
Craig H.
NI Applications Engineering
bzielinski
Aug 19, 2004, 4:19:56 PM8/19/04
to
Simple Who does not work, and I just got the PCMCIA card back from NI.
The problem I was having before (Card would not pass self test) is
fixed, so I suspect that the cable may not be working properly.
The problem I was having before (Card would not pass self test) is
fixed, so I suspect that the cable may not be working properly.
0 new messages