Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
How to set & use digital trigger for AIN on a DAQmx?
2 views
Skip to first unread message
hjehan
Jun 12, 2008, 1:40:08 PM6/12/08
to
1) How I configure a task to allow a digital input line to trigger a AIN reading in VB6.0 with a USB-6210?
2) To help me answer the above I created a task in Measurement & Automation Explorer that used a digital trigger (TRIGGER TYPE= DIGITAL EDGE, TRIGGER SOURCE = PFI0, EDGE=RISING). Then from VB I tried to figure out the parameters that were set. I had no luck. So, once I understand to achieve (1) above I want to be able to verify the resulting settings. What command(s) would I use?
2) To help me answer the above I created a task in Measurement & Automation Explorer that used a digital trigger (TRIGGER TYPE= DIGITAL EDGE, TRIGGER SOURCE = PFI0, EDGE=RISING). Then from VB I tried to figure out the parameters that were set. I had no luck. So, once I understand to achieve (1) above I want to be able to verify the resulting settings. What command(s) would I use?
Faris_A
Jun 16, 2008, 4:40:05 AM6/16/08
to
Hi Hjehan,
I recommend checking the following<a href="http://digital.ni.com/public.nsf/websearch/B22FE2B0F9C8935286256E920073DA07?OpenDocument" target="_blank"> knowledge Base </a>that can point you to the different DAQmx examples.
Regards,
Faris A
I recommend checking the following<a href="http://digital.ni.com/public.nsf/websearch/B22FE2B0F9C8935286256E920073DA07?OpenDocument" target="_blank"> knowledge Base </a>that can point you to the different DAQmx examples.
Regards,
Faris A
0 new messages