Groups

Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.

Dismiss

natinst.public.can.general

1–30 of 624

0 selected

Ma...@getfucked.com

11/10/17

Uploads - What is wrong with Easynews

Looking for Star Trek Discovery season 1 Episodes 6 onwards in english. Why does it seem there are no

unread,

Uploads - What is wrong with Easynews

Looking for Star Trek Discovery season 1 Episodes 6 onwards in english. Why does it seem there are no

11/10/17

Nicholas Randall Forystek

7/12/16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

unread,

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7/12/16

8/15/08

Synchronization of 2 CAN Ports with an M-series DAQ Card

Hi all I am trying to synchronize 2 CAN ports (each 2-series card in different PXI slot of

unread,

Synchronization of 2 CAN Ports with an M-series DAQ Card

Hi all I am trying to synchronize 2 CAN ports (each 2-series card in different PXI slot of

8/15/08

8/15/08

Re: synchronization of multiple CAN Board and a DAQ Board in PXI Chasis

Hi Dirk, I have a new problem... i need to sychronize 2 CAN (series-2) ports (each

unread,

Re: synchronization of multiple CAN Board and a DAQ Board in PXI Chasis

Hi Dirk, I have a new problem... i need to sychronize 2 CAN (series-2) ports (each

8/15/08

can we generate frequency using counters . if so then what is the range and resolution.2

8/12/08

CAN Write error code

Yes, there is a difference between error codes related to the CANopen protocol and error codes for

unread,

CAN Write error code

Yes, there is a difference between error codes related to the CANopen protocol and error codes for

8/12/08

8/11/08

Frame and channel API ?

Hey DirkW,          

unread,

Frame and channel API ?

Hey DirkW,          

8/11/08

8/11/08

Re: How can I read/write individual bits from/to CAN when using Channel API functions?

Well the trick is to just crate or have in your case a unsigned 8 bit channel. You can then use a 8

unread,

Re: How can I read/write individual bits from/to CAN when using Channel API functions?

Well the trick is to just crate or have in your case a unsigned 8 bit channel. You can then use a 8

8/11/08

8/8/08

Sensor device for LV subroutine using CAN?

Some clarification about the purpose of the subroutine:   We are dealing with a

unread,

Sensor device for LV subroutine using CAN?

Some clarification about the purpose of the subroutine:   We are dealing with a

8/8/08

8/4/08

Re: How to install a sensor and test it using NI-CAN?

Here are some sensor specs on CAN Communication:   -SAE J1939 (BOSCH CAN 2.0B active) -

unread,

Re: How to install a sensor and test it using NI-CAN?

Here are some sensor specs on CAN Communication:   -SAE J1939 (BOSCH CAN 2.0B active) -

8/4/08

8/1/08

trouble transmitting commands to CAN device with USB-8473

From what I understand the termination resistors minimize signal reflections thereby helping to

unread,

trouble transmitting commands to CAN device with USB-8473

From what I understand the termination resistors minimize signal reflections thereby helping to

8/1/08

7/31/08

Sure the SJA 1000 which is the controller in all your mentioned hardware has a powerful filter

unread,

Sure the SJA 1000 which is the controller in all your mentioned hardware has a powerful filter

7/31/08

7/30/08

Frame Channel Conversion: 2 Byte channel

See the attached picture for the different byte formats. If your format is motorola backwards, we do

unread,

Frame Channel Conversion: 2 Byte channel

See the attached picture for the different byte formats. If your format is motorola backwards, we do

7/30/08

7/30/08

troubless in lin network using usb-8476

Hi, thanks for your help. I have connected USB-8476 with my slave device. Actually,My

unread,

troubless in lin network using usb-8476

Hi, thanks for your help. I have connected USB-8476 with my slave device. Actually,My

7/30/08

7/28/08

ncSetAttr.vi returns error for setting Transciver mode with USB8472 hardware

Hi, To set your  Low Speed/fault tolerant module to sleep just use the set

unread,

ncSetAttr.vi returns error for setting Transciver mode with USB8472 hardware

Hi, To set your  Low Speed/fault tolerant module to sleep just use the set

7/28/08

7/28/08

Re: looking for drivers for USB 8473

Hi, The driver for the USB CAN product line is NI-CAN and the current version is 2.5.2. You can

unread,

Re: looking for drivers for USB 8473

Hi, The driver for the USB CAN product line is NI-CAN and the current version is 2.5.2. You can

7/28/08

7/25/08

Could you please open your own thread next time. I could not reproduce your memory leak here on my

unread,

Could you please open your own thread next time. I could not reproduce your memory leak here on my

7/25/08

7/24/08

XP Embedded CAN

Hi, Has anyone any experience of installing the NI-CAN 2.5.2 driver under XPe (XP Embedded)? In our

unread,

XP Embedded CAN

Hi, Has anyone any experience of installing the NI-CAN 2.5.2 driver under XPe (XP Embedded)? In our

7/24/08

7/24/08

RealTime and NI-DNET Configurator

Hi DirkW, Thanks for your timely help and valuable inputs. I will try reading the eds file and set

unread,

RealTime and NI-DNET Configurator

Hi DirkW, Thanks for your timely help and valuable inputs. I will try reading the eds file and set

7/24/08

7/23/08

Re: ncWaitForState BFF62001on state NC_ST_READ_AVAIL

Kathleen, If this is reproduceable, could you run the NI-SPY in parallel and log all the NI-CAN api

unread,

Re: ncWaitForState BFF62001on state NC_ST_READ_AVAIL

Kathleen, If this is reproduceable, could you run the NI-SPY in parallel and log all the NI-CAN api

7/23/08

7/22/08

How I diagnose the usb-8476 lin interface?

duplicate post. See this Link: <a href="http://forums.ni.com/ni/board/message?board.id=

unread,

How I diagnose the usb-8476 lin interface?

duplicate post. See this Link: <a href="http://forums.ni.com/ni/board/message?board.id=

7/22/08

7/17/08

Re: Disable LIN inactive frame

Hi Terry, Unfortunately... it cannot be disabled with set attribute... You will have to filter out

unread,

Re: Disable LIN inactive frame

Hi Terry, Unfortunately... it cannot be disabled with set attribute... You will have to filter out

7/17/08

7/16/08

Thanks,I want to see your VI verifying that.Is it the  "CAN Transmit

unread,

Thanks,I want to see your VI verifying that.Is it the  "CAN Transmit

7/16/08

7/16/08

Re: CANopen Node-ID

Normally devices allow to read the node ID from object 0x100B only. Devices have ether jumper to

unread,

Re: CANopen Node-ID

Normally devices allow to read the node ID from object 0x100B only. Devices have ether jumper to

7/16/08

7/15/08

Re: Filter for CAN Identifier

Hi, Yes I can open the zip file, and the filter settings works. Thanks, now I know how to configure

unread,

Re: Filter for CAN Identifier

Hi, Yes I can open the zip file, and the filter settings works. Thanks, now I know how to configure

7/15/08

7/11/08

Re: Error -1074388984 occurred at CAN Write (Multi-Chan Single-Samp 1D Dbl).vi

If i use the basic serial read and write example, I recieve this error:    Error -

unread,

Re: Error -1074388984 occurred at CAN Write (Multi-Chan Single-Samp 1D Dbl).vi

If i use the basic serial read and write example, I recieve this error:    Error -

7/11/08

7/10/08

checksum byte with a bit error

Hi, The classic checksum doesn't only sum the databytes it inverts the final result at the end.

unread,

checksum byte with a bit error

Hi, The classic checksum doesn't only sum the databytes it inverts the final result at the end.

7/10/08

7/10/08

Frame Channel Conversion Library: Write

I've worked it out. The key was to not just send a single value but an array of data fitting the

unread,

Frame Channel Conversion Library: Write

I've worked it out. The key was to not just send a single value but an array of data fitting the

7/10/08

7/9/08

Re: how can i get example.ncd file for labview 7.1

here you go Message Edited by Gibson on 07-09-2008 02:48 PMMessage Edited by Gibson on 07-09-2008 02:

unread,

Re: how can i get example.ncd file for labview 7.1

here you go Message Edited by Gibson on 07-09-2008 02:48 PMMessage Edited by Gibson on 07-09-2008 02:

7/9/08

7/9/08

How to set Code, Mask and Mode property in SJA1000

Yes, cRIO CAN requires to calculate and set the acceptance registers of the SJA1000 directly. See the

unread,

How to set Code, Mask and Mode property in SJA1000

Yes, cRIO CAN requires to calculate and set the acceptance registers of the SJA1000 directly. See the

7/9/08

7/9/08

Re: NI automotive Diagnostic Command Set and LV Real-Time

yes, it does. DirkW

unread,

Re: NI automotive Diagnostic Command Set and LV Real-Time

yes, it does. DirkW

7/9/08

Search

Clear search

Close search

Google apps

Main menu