IC Sized Male Pin Strip

1 view
Skip to first unread message

Dana Kelley

unread,
May 29, 2020, 8:27:10 AM5/29/20
to Nashua Robot Builders
I'm looking for 0.10" spaced male pin strips that will plug into IC sockets and solder into a typical PCB IC socket hole. The typical 0.025" (0.60 mm) square strips are too large.

These strips will solder into tiny modules and plug into the IC socket type female pin strip. Basically making the tiny module into an IC type device to plug onto a PCB so it is easily removed/ replaced.

The pin is about 0.020" (0.51 mm) diameter. the length about 0.375" (9.53 mm) give or take.

I've searched mouser and digi-key. I've found individual pins that should work and have order them. A strip is preferred. The pins will do for now. I want the strips on hand for future work.


Jay Francis

unread,
May 29, 2020, 8:48:02 AM5/29/20
to nashuarob...@googlegroups.com
Samtec will have them.  You can probably get free samples, or do small qty orders direct.

On May 29, 2020, at 8:32 AM, 'Dana Kelley' via Nashua Robot Builders <nashuarob...@googlegroups.com> wrote:


--
You received this message because you are subscribed to the Google Groups "Nashua Robot Builders" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nashuarobotbuil...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/nashuarobotbuilders/6cce55af-c027-4271-881a-3b9888d99aed%40googlegroups.com.

Jay Francis

unread,
May 29, 2020, 8:54:24 AM5/29/20
to nashuarob...@googlegroups.com

Dana Kelley

unread,
May 29, 2020, 9:12:49 AM5/29/20
to nashuarob...@googlegroups.com
Thanks Jay,

It is always about finding the correct search phrase....

I cannot wait for good AI search tools that do far better at understanding multiple words to combine into "machine pin strip"!

Reply all
Reply to author
Forward
0 new messages