leds not working

[SNOWMAN]

i have an N tune mounted on my Strat ,Vol position, for about 8
months. It's good produt and useful,I enjoyed having it and using it.
Today my pot started to crackle when I adjust the vol and the leds for
B and D are not working! Help!!!

[Sam Sudore]

Thank you for contacting N-Tune,

It sounds like you may have a loose connection, possibly the solder on terminal M or lug 5 (Input and output on the pot).  Sometimes if the solder joints were not adhered properly they will wiggle loose after a while.  Check it out or have a guitar tech check them to make sure they are sound.  Let me know what you find.

Regards,
Sam Sudore 
President/CEO
Zero Crossing Inc.
425-471-3133
www.ntune.com


The information contained in this email may be confidential and/or legally privileged. It has been sent for the sole use of the intended recipient(s). If the reader of this message is not an intended recipient, you are hereby notified that any unauthorized review, use, disclosure, dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this communication in error, please contact the sender by reply email and destroy all copies of the original message. To contact our email administrator directly, send to se...@zeroxing.com

Thank you.
                                                                                                                        

--
You received this message because you are subscribed to the Google Groups "N-Tune Discussion" group.
To post to this group, send email to n-tune-d...@googlegroups.com.
To unsubscribe from this group, send email to n-tune-discuss...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/n-tune-discussion?hl=en.