Steps for use on d-link boxee box
dmshimself
on a dlink boxee? I'm not able to get past the autodiscovery and
enter the DB details.
I've added eriks repository, dialled it up and seen there are two
apps, selected the mythboxee app (it doesn't appear have a visible
version, but does comment that version 23.1 is needed) and install it
to the d-link. I get the invitation to to enter my setup pin as this
is the first time setup has been run.
No matter whether I enter the pin (which I do know!) or leave the
default, an attempting auto discovery message comes on and never comes
back. I've tried with the default protocol 23056 and 56 and I get the
same results.
If I do the same steps on my windows boxee, all is well.
Any suggestions?
dmshimself
might give some clues. While the autodiscovery banner is up, the top
right part of the screen with mythtv DB settings is there but dimmed
out. I have found I can select and fill in the database area, but
pressing test and save doesn't appear to do anything. If I go out and
back in, the settings haven't been saved, but I'm guess that is
because the test and save hasn't completed.
Ryan Snyder
myself.
You need to change the protocol version from 23056 to just 56. My
suggestion is to locate the MythStatic.py change it and restart your
computer to make sure that it is using it. Then you can go into the
mythboxee app and at least get it to connect.But you might end up like
where it just sits at the loading screen.
On Mar 4, 11:04 pm, dmshimself <david.medland-sla...@touchpaper.co.nz>
wrote:
dmshimself
putting it back to 23056 just in case, reboots in between. It's
currently set to 56 but I get the same result
Cheers
Dave
Erik Kristensen
dms, are you trying to get this to work on the Boxee Box or on another
platform (windows, linux, etc)
Also no updated on 0.24 support, I've been working on converting the
necessary libraries but have't had much luck as of yet :(
-Erik
> --
> You received this message because you are subscribed to the Google
> Groups "MythBoxee" group.
> To post to this group, send email to myth...@googlegroups.com
> To unsubscribe from this group, send email to
> mythboxee+...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/mythboxee?hl=en
>
dmshimself
This in on a dlink boxee box. Latest firmware.
If I try the same sequence on a boxee windows platform I get much
further and in many cases can play files fine.
Ryan Snyder
Im running a Dlink Boxee Box and it just sits at the loading screen.
Running .23.1 Myth and Protocol Version 56. It sames that it connects
but it then just loads and loads.
Ryan
On Mar 6, 12:18 pm, dmshimself <david.medland-sla...@touchpaper.co.nz>
wrote:
Ryan Snyder
Im running a Dlink Boxee Box and it just sits at the loading screen.
Running .23.1 Myth and Protocol Version 56. It sames that it connects
but it then just loads and loads.
Ryan
On Mar 6, 12:18 pm, dmshimself <david.medland-sla...@touchpaper.co.nz>
wrote:
Erik Kristensen
Well .23.1 uses 23056 as the protocol not 56. 0.23 was 56.
The version that is available for the box uses 23056 and supports only 0.23.1.
If you can grab the logs off the device that would help troubleshoot.
http://IP_OF_BB:8080 should allow you to download the logs. I normally
syslog my logs so I am not 100% positive that the logs I'll need are
located in that package but you can send it to me directly if you'd
like.
-Erik