Cross compilation issue - with Powerpc

[rrarankurissi]

Hi


I am trying to port mcproxy to powerpc achitecture crosscompiled boost library and mcproxy for that  after proper compilation i have downloaded to development board then I gave an execution command.

./sudo mcproxy -svvv -f /etc/config/mcproxy.config

then I am geting an error

mcproxy[6439]: unhandled signal 11 at 00000000 nip 100408d8 lr 100407e8 code 30001
Segmentation fault

Then I tried command

 
./sudo mcproxy -svvv -f /etc/config/

##-- multicast proxy status --##
is running: 0
verbose level: 0
print proxy_status information: 0
reset all reverse path filter: 0
config path: /tmp
-- proxy configuration --
##-- proxy configuration --##
protocol IGMPv3


and it stops nothing no messages or nothing after this

what migh be the reason . Do I want to do any special modification for cross compile of powerpc

Thanks
Rajeesh

[Sebastian Wölke]

Hello Rajeesh,

I don't know if this error is related to the Powerpc achitecture, crosscompiling or the operating system.
You could try to compile Mcproxy directly on this Powerpc to minimze the error-space.

Regards,
Sebastian

This electronic message, including attachments, is intended only for the use of the individual or company named above or to which it is addressed. The information contained in this message shall be considered confidential and proprietary, and may include confidential work product. If you are not the intended recipient, please be aware that any unauthorized use, dissemination, distribution or copying of this message is strictly prohibited. If you have received this email in error, please notify the sender by replying to this message and deleting this email immediately.