Advanced Engine.Preferred Speed Units Not Saved
17 views
Skip to first unread message
Tony Grimm
Jun 10, 2016, 10:13:59 PM6/10/16
to MSDroid
I use MS3 Basic on 1.4.1 b5 - this has occurred on earlier firmware too.
This was discovered because the Basic Settings.Fan Control setting for VSS Shutoff units/value wasn't matching TunerStudio.
If I change the Advanced Engine.Speed And Gear Sensors.Preferred Speed Units from MPH to KPH, for the current session the Basic Settings.FanControl.VSS Shutoff/Hyst units shows correctly (as KPH), however the value displayed is still based on MPH. i.e. TunerStudio shows KPH and value of 110 : MSDroid shows KPH and value of 68.
If I exit the application and restart the application, the Advanced Engine.Speed And Gear Sensors.Preferred Speed Units returns to MPH and the Basic Settings.Fan Control.VSS Shutoff/Hyst units also shows MPH - the value still shows 68.
Not a huge issue but could cause issues with under/over heating.
Tony
This was discovered because the Basic Settings.Fan Control setting for VSS Shutoff units/value wasn't matching TunerStudio.
If I change the Advanced Engine.Speed And Gear Sensors.Preferred Speed Units from MPH to KPH, for the current session the Basic Settings.FanControl.VSS Shutoff/Hyst units shows correctly (as KPH), however the value displayed is still based on MPH. i.e. TunerStudio shows KPH and value of 110 : MSDroid shows KPH and value of 68.
If I exit the application and restart the application, the Advanced Engine.Speed And Gear Sensors.Preferred Speed Units returns to MPH and the Basic Settings.Fan Control.VSS Shutoff/Hyst units also shows MPH - the value still shows 68.
Not a huge issue but could cause issues with under/over heating.
Tony
Reply all
Reply to author
Forward
0 new messages