Getting the mqtt config dynamically

[Elona Homes]

Hi,

Just wanted to if there is any way to see the mosquitto config dynamically, using some commands while the broker is running.

Thanks in advance

[Andy Stanford-Clark]

That would be one for the mosquitto forum rather than MQTT… but I’m pretty sure the answer is no. 

Andy

--
To learn more about MQTT see https://mqtt.org
---
You received this message because you are subscribed to the Google Groups "MQTT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to mqtt+uns...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/mqtt/091dcc1e-adab-497e-991b-05be578412fcn%40googlegroups.com.

[ran...@bevywise.com]

What is the configuration you want to see from the Broker ? 

The parameters you may need from the edge device may be application specific and will not be part of the Broker parameters. 

Just curious. 

Ranjith

[Andy Stanford-Clark]

Now Ranjith has got me thinking about this … :)

You could write a little application, sitting on a topic, answering requests for aspects of the configuration, that runs on each device where there’s a broker…

Andy

--
To learn more about MQTT see https://mqtt.org
---
You received this message because you are subscribed to the Google Groups "MQTT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to mqtt+uns...@googlegroups.com.

To view this discussion visit https://groups.google.com/d/msgid/mqtt/1d450099-e4ea-4ed5-8e8f-11793794e7d7n%40googlegroups.com.