Can u send me some of the wheels you’re coming up with in Chrome???
Andre Soto
(440) 962-2651
(440) 962-2768 Fax
Andre...@moen.com
25300 Al Moen Drive
North Olmsted, OH 44070-8022
www.moen.com
Sent from my BlackBerry® wireless handheld
I can send you a copy of the page from the Bentley manual.
I don’t like cutting into the harness right there behind the radio (access to wires and such)– it might be a better option to run directly to the door speaker.
Remember to reset the jumper to external speaker.
Andre Soto
(440) 962-2651
(440) 962-2768 Fax
Andre...@moen.com
25300 Al Moen Drive
North Olmsted, OH 44070-8022
www.moen.com
_______________________________________________
This message was scanned for viruses prior to entering the Moen network.
Sent from my BlackBerry® wireless handheld
Date: Mon, 7 Jul 2008 15:02:10 -0400
To: <Mpre...@googlegroups.com>
Subject: RE: Any luck searching for some wheels???
I think I would send your wire through the loom in the door jam…. It seems a little cleaner that way?
Then remove the door panel and attach near the tweeter.
This way you can avoid the frequency splitter in between the midrange speaker and the tweeter… and just power the tweeter.
The tweeter requires very little power and you may get more volume that way.
Andre Soto
(440) 962-2651
(440) 962-2768 Fax
Andre...@moen.com
25300 Al Moen Drive
North Olmsted, OH 44070-8022
www.moen.com
I figured so. Any tips on how to get the wire there and how to get at the tweeter? Elegance is better than brut force…..
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.526 / Virus Database: 270.4.5/1537 - Release Date: 7/6/2008 5:26
AM
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.526 / Virus Database: 270.4.5/1537 - Release Date: 7/6/2008 5:26 AM
Check this site, enter car type. There is a 5 spoke chrome and one with black spokes and chrome rim. Look pretty.
http://www.belletire.com/wheels/
Another possibility
http://www.wheelsandcaps.com/specials_packages.asp?id=3&special=BMW%20Specials
There is a pic with these wheels. Looks nice
http://www.buywheelstoday.com/products/?id=2649
Remind me what size and offsets again.
The last link has option for 3.33” lip and 2” lip
They are 1200 for set but if I can get 500-600 for mine and if these are easy to keep clean and shiny, it would be worth it.
Don’t forget to give some tips on getting wire to tweets.
Z
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.526 / Virus Database: 270.4.5/1537 - Release Date: 7/6/2008 5:26
AM
Another set. Speedy wheel type. Maybe too roundy.
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.526 / Virus Database: 270.4.5/1537 - Release Date: 7/6/2008 5:26
AM
Door panel off? Where to find wire to tweet, in door panel?
Another site.
Look at gt-5 and fer-ari types. Come in set of 4.
I am intruiged by the chrome with black accent look.
http://www.myhotbmw.com/bmw_products/3_Series_2Dr/BMW_4_Wheel_Packages/2004
Sent from my BlackBerry® wireless handheld
Sent from my BlackBerry® wireless handheld
Sent from my BlackBerry® wireless handheld
Check out tire rack. You may cringe, but I am thinking of the following
Brenner BR01 series, either chrome or machined lip
Bonus is the big B in center hub.
Sport MK11, the gray.
Bonus is wont show brake dust.
I also like the Avarus AV5
Bonus, nice look and mix with chrome. Negative, little bolts to clean. But at least on black lip.
Other one I like is beyern type 5. Clean, chrome, and all smooth lines to allow easy clean.
For what I want, the wheels just need to not be UGLY. I think a lower quality wheel that is not glitzy but CLEAN will look nicer than a high quality wheel that is DIRTY.
Accepting that I may be a bit obsessed with clean wheels, including the inner rim part, maybe stepping down is not so bad.
I wont race, I will go fast, and I will take turns. I wont be beating them up.
Thoughts?
<br
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.526 / Virus Database: 270.4.5/1537 - Release Date: 7/6/2008 5:26
AM
I kind like these actually.. I think the roundness of it would look decent with the shape of the car.
Andre Soto
(440) 962-2651
(440) 962-2768 Fax
Andre...@moen.com
25300 Al Moen Drive
North Olmsted, OH 44070-8022
www.moen.com
Of the two choices – I prefer the ferari ones.
Andre Soto
(440) 962-2651
(440) 962-2768 Fax
Andre...@moen.com
25300 Al Moen Drive
North Olmsted, OH 44070-8022
www.moen.com
Mee too. Would be nice to get an idea of what they look like on an M3. You think they have any pics?
Look at the tire rack ones I mentioned last night
The door panel will be tough. I see that the tweeter is near the handle to open. Might be able to just pop that off and get to wires if I can fish it up without screwing up the power window.
Ought to have unit this week. Any chance we can work here? On call this weekend.
Version: 7.5.526 / Virus Database: 270.4.6/1540 - Release Date: 7/8/2008 6:33 AM
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.526 / Virus Database: 270.4.6/1540 - Release Date: 7/8/2008 6:33 AM
Honestly – none of these are something I would choose for you.
But – the Brenner bBR01 don’t seem too bad.
The beyern type 5 is similar and also – justifiable.
Both of these seem to suit your needs.
My thoughts –
For what I want, the wheels just need to not be UGLY. I think a lower quality wheel that is not glitzy but CLEAN will look nicer than a
High quality wheel that is DIRTY.
Wrong! – If I believed that – I would buy Hondas… but that’s just me.
And yes- I think you’re a bit obsessed with clean wheels. But that’s what
makes each of us individuals… This is your car, not mine.
I think maybe it’s important for you to pick your poison here…
Q- are you thinking of purchasing right away? I’m curious when I can list
your wheels.
Andre Soto
(440) 962-2651
(440) 962-2768 Fax
Andre...@moen.com
25300 Al Moen Drive
North Olmsted, OH 44070-8022
www.moen.com
Yeah.. I can come out there this time! It would be my pleasure sir. You thinking like Sat or Sun?
Sent from my BlackBerry® wireless handheld
Date: Tue, 8 Jul 2008 08:01:15 -0400
I’ll put the wheels up on the forums tonight...
Would probably do better than listing on ebay…
I will help as much as I can, bro.
Sent from my BlackBerry® wireless handheld
Date: Tue, 8 Jul 2008 08:12:40 -0400
Need help. Saw some pics with beyern style. The “convex” or out arching spokes do not look as good as more “concave” or flat types. Can you direct me to a site with pics of e46 and wheels?
I like the speedy wheel, the bremmer br01.
Any thoughts about silver vs. c hrome?
Again, you can help me get style and quality, I will need to vet out for ease of clean. The less nooks and crannies the better.
Tried to look at wiring yesterday. Door panel will be tough. Got the wiring harness in door jam. There is connector. The car end has two sets of wires. I think it will be fine to go to radio harness. We should disconnect cpu unit from power until we get wiring attached. Then connect.
Ought to be fine. I will work on paralellity this week.
Almost baby time for you eh????
Please help with wheels. Consuming!
Version: 7.5.526 / Virus Database: 270.4.7/1541 - Release Date: 7/8/2008 7:50 PM
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.526 / Virus Database: 270.4.7/1541 - Release Date: 7/8/2008 7:50 PM
The breyton vision II look nice, even though they are not 5 spoke.
From: Mpre...@googlegroups.com [mailto:Mpre...@googlegroups.com] On Behalf Of Soto, Andre'
Sent: Tuesday, July 08, 2008 8:01 AM
Version: 7.5.526 / Virus Database: 270.4.7/1541 - Release Date: 7/8/2008 7:50 PM
No virus found in this outgoing message.
Checked by AVG.
Need help. Saw some pics with beyern style. The “convex” or out arching spokes do not look as good as more “concave” or flat types.
I like your conclusion here for the wheels… I tend to agree.
Can you direct me to a site with pics of e46 and wheels?
What kind of wheels?…. I just mean you can go to hre.com, iforged.com, and fikse.com but they will only show pics of their wheels. You can also try the bimmerforums.com – hidden in their threads are oodles of pics of all kinds of wheels. . . but not easy to surf through.
I like the speedy wheel, the bremmer br01.
Any thoughts about silver vs. c hrome?
I prefer silver for everyday use… but chrome will stand out much more. Chrome has a more resilient finish and a different “styling” and therefore appeal vs. silver.
Tried to look at wiring yesterday. Door panel will be tough. Got the wiring harness in door jam. There is connector. The car end has two sets of wires. I think it will be fine to go to radio harness. We should disconnect cpu unit from power until we get wiring attached. Then connect.
Ought to be fine.
I don’t prefer this method.. cutting the harness there could be problematic long term.. it may be worth the risk long term though.
Please help with wheels. Consuming!
I would love to help.. but I would have just as hard a time buying you a new shirt for your birthday. How am I going to know what you like?
I saw you mentioned the breyton’s – that’s the nicest choice I think you’ve chosen thus far.
Sent from my BlackBerry® wireless handheld
Date: Wed, 9 Jul 2008 08:36:35 -0400
Generally speaking, I don’t prefer 5 spoke wheels… with some exceptions of course.
Which Breyton? The vision only comes in a 20 from tirerack.
The Spirit comes in a black center… that could suit your black wheel urge.
You probably wouldn’t have to clean as much if the centers were black ey?
Remember 19” staggered 8.5 10
We could powder coat your wheels black.?
Sent from my BlackBerry® wireless handheld
Date: Wed, 9 Jul 2008 08:55:58 -0400
Yeah.. I visited there.. but mostly ghetto like u said.