TP Link "Could not parse response" error message

[ChrisM]

Hi does anyone have experience using TP Link devices with AM? I've begun to notice that these messages are overwhelming the AM log.  I have about 50 devices all reporting similar messages continuously every second.  I have TP Link poling set to 1 second high would explain the frequency but I had not noticed these messages previously.

Thanks

Could not parse response from 192.168.2.68: {"system":{"get_sysinfo":{"sw_ver":"1.5.8 Build 181210 Rel.094729","hw_ver":"1.0","mic_type":"IOT.SMARTPLUGSWITCH","model":"HS220(US)","mac":"0C:80:63:CF:CA:E2","dev_name":"Smart Wi-Fi Dimmer","alias":"MH_LGHT_Shower_DIM","relay_state":1,"brightness":100,"on_time":7925,"active_mode":"none","feature":"TIM","updating":0,"icon_hash":"","rssi":-48,"led_off":0,"longitude_i":0,"latitude_i":0,"hwId":"84DCCF37225C9E55319617F7D5C095BD","fwId":"00000000000000000000000000000000","deviceId":"8006CD40352FB8B8C741DD242A74BAD41A9E2273","oemId":"3B13224B2807E0D48A9DD06EBD344CD6","preferred_state":[{"index":0,"brightness":100},{"index":1,"brightness":75},{"index":2,"brightness":50},{"index":3,"brightness":25}],"next_action":{"type":-1},"err_code":0}}}

[MikeP 4 MPP]

Sorry, in the previous version I'd left a tracepoint in that was reporting to the log even when there was no error.  If you upgrade again to 16.16.0 it should be gone.

[ChrisM]

Thanks Mike.  Did the upgrade and that fixed it.