Skip to first unread message
driskel
Apr 15, 2019, 12:40:28 PM4/15/19
to MPF Users
I have been working on a home brew pin for quite awhile, when time permits.
I figure this would be a great place to document the build process.
Plenty of photos to upload and describe.
driskel
Apr 15, 2019, 12:45:15 PM4/15/19
to MPF Users
Prototyping:
Multimorphic, P3-Roc, PD-16 and SW-16 arrived. Laying out on a prototype board.
driskel
Apr 15, 2019, 12:47:03 PM4/15/19
to MPF Users
Prototype:
Creating prototype terminal strips, these will be replaced in the real machine.
driskel
Apr 15, 2019, 12:48:53 PM4/15/19
to MPF Users
Prototype:
P3-ROC, 2 PD-16s, 4 SW-16s and 1 PD-LED board mounted and wired on a prototype head. This will all be redone.
driskel
Apr 15, 2019, 12:54:45 PM4/15/19
to MPF Users
5v, 12v and 70v ran to terminal blocks.
5v and 70v to PD-16s
5v to P3Roc, and PD-LED
12v to SW16s
driskel
Apr 15, 2019, 12:57:15 PM4/15/19
to MPF Users
Prototype:
ATX power supply providing, 5v and 12v
Antek power supply for 70v
Some cabling cleaned up and and a bunch of wire harnesses for driver and switch boards
JLay
Apr 15, 2019, 12:58:35 PM4/15/19
to MPF Users
Looking good - pretty similar to my build so far as well. Are you on the pindev Slach channel (PM me and I can send an invite if not)?
I found these terminal blocks to be great btw:
jabdoa
Apr 15, 2019, 1:01:46 PM4/15/19
to MPF Users
Do you have a name/theme for your machine? Should we list it in the projects list on missionpinball.org?
Jan
driskel
Apr 15, 2019, 5:46:02 PM4/15/19
to MPF Users
Theme is about a few of my bands. I do not have a title yet, but basically you pick the band and modes are related to the band, music and direction.
Please do not list it yet, Too far away to qualify :) I have a lot to post to catch this thread up.
driskel
Apr 15, 2019, 6:01:02 PM4/15/19
to MPF Users
Prototype:
Early version of MPF.
driskel
Apr 15, 2019, 6:02:04 PM4/15/19
to MPF Users
Prototype:
MDF playfield to slice and dice :) Laying out slingshot by hand.
driskel
Apr 15, 2019, 6:03:18 PM4/15/19
to MPF Users
Prototype:
MDF playfield to slice and dice :) Laying out slingshot by hand.
driskel
Apr 15, 2019, 6:05:04 PM4/15/19
to MPF Users
Prototype:
Slingshots
driskel
Apr 15, 2019, 6:06:05 PM4/15/19
to MPF Users
Prototype: Slingshots
Message has been deleted
driskel
Apr 15, 2019, 10:45:39 PM4/15/19
to MPF Users
Thanks for the link. I am not on slack at all.
driskel
May 6, 2019, 2:09:03 PM5/6/19
to MPF Users
Williams Widebody cabinet, hardware and glass from Virtuapin
driskel
May 6, 2019, 2:09:36 PM5/6/19
to MPF Users
Greg Sealby
May 6, 2019, 5:44:14 PM5/6/19
to MPF Users
Looks awesome Driskel! Can't wait to see the results
driskel
May 6, 2019, 5:51:05 PM5/6/19
to MPF Users
give me 5 more years :)
driskel
May 6, 2019, 6:03:47 PM5/6/19
to MPF Users
Ground Braid:
driskel
May 6, 2019, 6:05:05 PM5/6/19
to MPF Users
driskel
May 6, 2019, 6:05:52 PM5/6/19
to MPF Users
Message has been deleted
Message has been deleted
driskel
May 6, 2019, 6:21:07 PM5/6/19
to MPF Users
Coin Door:
driskel
May 6, 2019, 6:21:52 PM5/6/19
to MPF Users
driskel
May 6, 2019, 6:24:44 PM5/6/19
to MPF Users
Installed vent grills:
driskel
May 6, 2019, 6:28:34 PM5/6/19
to MPF Users
Drilling and installing playfield slide assembly spacers and grounding:
driskel
May 6, 2019, 6:30:24 PM5/6/19
to MPF Users
Installing playfield support arm:
driskel
May 6, 2019, 6:31:54 PM5/6/19
to MPF Users
Cutting power switch hole and mounting t-nuts for power filter box:
driskel
May 6, 2019, 6:35:33 PM5/6/19
to MPF Users
Mounting shaker motor, tied to ground braid:
driskel
May 6, 2019, 6:37:45 PM5/6/19
to MPF Users
Mounting subwoofer:
driskel
May 7, 2019, 6:49:32 PM5/7/19
to MPF Users
Mounting power/filter box:
driskel
May 7, 2019, 6:50:51 PM5/7/19
to MPF Users
driskel
May 7, 2019, 6:51:31 PM5/7/19
to MPF Users
Reply all
Reply to author
Forward
0 new messages