Flipper coils way too strong

[David Gamboa]

I've tried adjusting the code in my coils config and even when set to 1 the flippers are super strong. 

  c_flipper_left:
    number: 0-0-8
    allow_enable: true
    default_pulse_ms: 1
    default_pulse_power: 1  
  c_flipper_right:
    number: 0-0-9
    allow_enable: true
    default_pulse_ms: 1
    default_pulse_power: 1  

what should i be looking for?  i have a 48v power supply and classic stern flipper mechs

[David Gamboa]

just saw that i have allow enable in my code which gives 100% power. my bad you guys

[Max Power]

Is this a classic bally/stern conversion?

A 48V supply will adjust down to 43V to match stock voltage.

--
You received this message because you are subscribed to the Google Groups "MPF Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to mpf-users+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/mpf-users/a342a214-ee2a-41c2-80d7-fcacca0f64den%40googlegroups.com.

[cobra18t]

You can also lower your pulse_power and hold_power (1 means 100%, 0.5 means 50%).

[David Gamboa]

thanks guys. both ways suggested worked to bring the voltage down.