disable bad serial led

Skip to first unread message

Ben Tripoli

Sep 7, 2023, 9:37:45 PMSep 7
to MPF Users
Fairly sure I read sometime ago, possibly in the older docs, that you could disable a led in the config. I put triple leds in my pops but one has gone bad. I cant seem to find reference to disabling in the newer docs unless I missed it. Is it still possible?
I'm using cobrapin with ws2812s leds

    previous: l_right_popb
    subtype: led
    type: grb

Ernie Silverberg

Sep 7, 2023, 9:44:26 PMSep 7
to mpf-...@googlegroups.com
Are the leds beyond that pop working?

You received this message because you are subscribed to the Google Groups "MPF Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to mpf-users+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/mpf-users/779fdab0-ab3b-4d0b-9554-a5f3c6da9709n%40googlegroups.com.

Ben Tripoli

Sep 8, 2023, 1:33:18 AMSep 8
to MPF Users
Yes the rest of the chain works fine if this one led is "off:. I thought I could just disable it, but I will just do a global search and replace in the code to keep it turned off until I replace the physical led itself. Actually the other 2 pops have a non working led too (most likely from the vibration) but those 2 do not affect the rest of the leds. Going to replace them with a different type that may stand the vibration better.
Reply all
Reply to author
0 new messages