watchdog timeout trouble from 4.3R to 4.4S
Francois Laissus
I've upgrade my laptop from 4.3R to 4.4S : installword+installkernel+mergemaster
Unfortunately everything works fine under 4.4S but pccard+wireless
with error message "wi0: watchdog timeout".
More, pccardd doesn't detect plug-in/plug-out of the Orinoco wifi card.
It sounds like an irq problem but I still enable to change the irq associated
with the nic (3) even when i am launching pccardd with -I -i 11 for instance.
The same system booted with old kernel (4.3R) and using same configuration
files and so the same irqs is working fine : no watchdog timeout and
pccardd works correctly.
Any idea ? Thanks.
François
-------------------------
Here the 'dmesg' of the 4.4S :
-------------------------
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #7: Sun Nov 25 19:09:42 CET 2001
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (quarter-micron) (262.39-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x582 Stepping = 2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67043328 (65472K bytes)
avail memory = 62328832 (60868K bytes)
Preloaded elf kernel "kernel" at 0xc02ec000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
Using $PIR table, 4 entries at 0xc00fdf90
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 1.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 1.2
chip1: <Intel 82371AB Power management controller> port 0x2180-0x218f at device
+1.3 on pci0
pci0: <NeoMagic MagicGraph 128XD SVGA controller> at 2.0 irq 0
pci_cfgintr_virgin: using routable interrupt 3
pci_cfgintr: 0:10 INTA routed to irq 3
pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 3 at device 10.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ad0: 4126MB <TOSHIBA MK4309MAT> [8944/15/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 3 slot 0 on pccard0
wi0: Ethernet address: 00:02:2d:1d:54:26
wi0: watchdog timeout
To Unsubscribe: send mail to majo...@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message