Pelco Cameras

[Chris Cleaver]

Whats the best way to set up a Pelco IM10LW10-1E IP Camera? I have a few that got pulled from a site i would like to try and setup. Has anyone used these?

Thank you

Chris

[Kevin Shumaker]

https://www.ispyconnect.com/camera/pelco

rtsp://ip_address/stream1

--
You received this message because you are subscribed to the Google Groups "motioneye" group.
To unsubscribe from this group and stop receiving emails from it, send an email to motioneye+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/motioneye/191b61eb-952b-4b57-a6e0-7b0e525b1c80n%40googlegroups.com.

--

Thanks

Kevin Shumaker

Personal Tech Support

N38° 19' 56.52"
W85° 45' 8.56"

Semper Gumby
“Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA
Ethics are what we do when no one else is looking.
Quis custodiet ipsos custodes?

“There is no end to the good you can do if you don’t care who gets the credit.” - C Powell

You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[Chris Cleaver]

Thanks Kevin I can get it to work with a Pelco DVR system I was hoping to make it work with Motioneys, When i try the  rtsp://ip_address/stream1 with the appropriate IP address I get an error and says a refresh might be needed.

[Kevin Shumaker]

Did you select Network Camera?

For most rtsp:// cameras the bottom box is option TCP or UDP. Try both.

Be sure to delete the camera between bad attempts.

There are other options for the cameras on the iSpy page. Do not use the admin/password format they use, place the info in the correct places when adding the cameras.