A better test would be installing https://github.com/motioneye-project/motioneyeos/releases/tag/

I installed motioneyeos-dev20201026 clean on a PiZero. I used a Tiga USB dashcam for my camera I

working with old tech here so that might be contributing to my issues :) had a storm here last night

NEVER MIND! SOLVED?!! :) realized that i had entered .242 when i setup/tested the new RPi but then

Hi, My motion eye set up was acting weird, stuttering and randomly a fourth non existent camera

@gsahli "Sound familiar to anyone?" Yes, me too. On Tuesday, September 23, 2025 at 7:01:00

thanks for the replay/questions -- will monitor motionEyeOS dev20201026 on RPI3B+ with 2 USB cameras

thanks for the continuing GREAT tech support! all working now! i think the only difference was that

I would suggest posting a request on the github: https://github.com/motioneye-project/motioneye/

I would suggest creating an issue here: https://github.com/motioneye-project/motioneye/issues and see

You can also change the default path there to something like /home/<user>/cameras/cameraxx On

Just thinking. For the Anpviz camera, all I need is a picture every 15 minutes. Is it possible to

Running motioneye on Linux (motionEye 0.42.1, Motion 4.2.2, Ubuntu 20.04 on I386): When replaying or

Hello, I have posted question into below place as well. Need help or support for motioneye into

It is helpful to say what version of motionEye, and which OS you are using, and whether it's a

Just tried a USB camera that I got to work with this hardware, and it is also getting the same grey

I don't know when you switched to the motionEye from motionEyeOS, but it can and does make a

Don't know what happened to my first posting of this. I can successfully get a jpg image from my

Getting simple reply to existing conversations and new conversations deleted after posting, before

Don't know what happened to my first posting of this. Why did two attempts get deleted? I can

Don't know what happened to my first posting of this. I can successfully get a jpg image from my

I've hunted around the web for a few days to find this answer. lib camera-hello works, the video0

I just rem'd out the network sections. I didn't think it would be a network issue, I just

PiCam modules newer than the PiCam 1.3 are not supported in the kernel included in any motionEyeOS (

In the docker run command, it has -v /etc/localtime:/etc/localtime:ro \ to pick up the local host

As to using a phone USB camera, I don't think it would work in either motioneye or motioneyeos as

just posted, solved via : https://github.com/motioneye-project/motioneyeos/issues/1839

Hi, This morning all of a sudden I cannot log into motioneye webpage to change things, using: user

I would open a new issue with motionEye Devs here: https://github.com/motioneye-project/motioneye/

Good to hear...