Etap Star

[Mary Hargrove]

ThenTarget Analytics ranks your individuals and prospects on their wealth data up to five stars. The higher the wealth rating, the higher the stars. With this information, you can determine where to focus your fundraising energies and who to ask for larger gifts. For example, we recommend you assign your four- and five-star constituents to an attentive fundraiser with more care and interaction than other donors.

This data appears on the Data Health Scorecard as well as the Wealth Rating tile on the account Home page. You can also query and report on wealth data to analyze relevant information for your organization.

Deltastar is equipped with ETAP software for conducting studies on power system faults and design graded protection relays settings. Deltastar uses state of the art relay setting software and tools to recommend settings for Distance protection, Transformer Differential, Line Differential protection relays of SEL, AREVA, GE, SIEMENS, ABB.

All projects require a J6 report for approval to commence construction. While Part J6 of the BCA is a good base for Energy Efficiency, Greenstar ratings, BREEAM and LEED are a commercial commitment to reducing a building environmental footprint. It can be argued that Energy Ratings are costly, but the benefits out weigh the up front costs with running cost savings, comfortable buildings for staff, reduced maintenance expenditure etc.

In Figure 1 displays a near linear relationship. There is no doubt that the more current produced = the greater light output. The LED diode that is run with High Milli-amps cannot maintain the original light output. The LED degrades and in turn the light output is less with time. But running LED Diodes hard will affect the running life of an LED luminaire. See How much light is left after 5 years?

When illuminating a space, it is best to choose a product that will perform the best within the space. Choosing aesthetically pleasing products with high Lm/W may not be the best selection for a space. Using Polar-curves to help select products to best service light within a design is extremely important.

Is there such this as healthy lighting? Well of course! Luminaires that are high in glare as described above can have adverse affects on our health. badly illuminated spaces can cause poor visibility. Not enough lighting can make it hard to perform tasks and will cause eyes to be strained and ultimately cause head aches or migraines. Too little light over time will cause a decline in our eye sight as will too much light.

Humans are like moths, we are drawn to light, bright spaces but we are unable to linger in overly bright spaces preferring the comfort of measured lighting. Over bright spaces are also unhealthy. Over bright spaces and glare go hand in hand. Too much light and Glare damage our eyes, this is not new information as we all carry sunglasses with us to protect our eyes from UV and glare outside, but for some reason we create similar harsh lighting within our homes and work spaces. Spaces that are too bright will inherently have glare of surfaces that will indirectly cause discomfort like bench tops, mirrors and computer screens being common. These surfaces become particularly dangerous for our eyes as we look directly into the glare source as we work. Like not enough light, too much light will cause degradation in eyesight and head aches/migraines.

Poor lighting will lower work place productivity due to poor visibility, head aches or migraines. Concentration is reduced dramatically due to poor illumination. A poorly illuminated space will not be conducive to a comfortable working space to support staff over the time required of them by employers. Good working environments will have well designed and measured lighting design with low glare, even illumination and controlled lumen output.

Good lighting manufacturers will ensure their understanding of the science of LED Lighting and design their products accordingly. Each product should be tested for efficiency, heat and endurance. Ask your lighting supplier for a photometric file, the heat tests recorded at the T-junction and the LLMF values of the luminaire. See below for further explanations.

ETAP offer high lumen per watt luminaires, this varies across their range. With high Lm/W products with good beam spread and low UGR values we can achieve lighting design with as low as 2.5W per m for an average office space. The U3 troffer has average spacing of 3.1m resulting in less lumimaires which in turn, lowers capital costs. Another bonus when using ETAP products to achieve Greenstar projects is ETAP Lighting offer high Maintenance Factors.

Many lighting designer are able to sort the true value of a product by checking the photometric file (the IES file or LDT files). Some brand publish the diode lumen output rather than the luminaire lumen output. The problem being, the diode will perform differently when it is installed into the luminaire. Many variances are involved: Reflectors, heat dissipation, diffusers, louvres and lenses. Each fitting has a vastly different outcome depending on the luminaire design. For one known example, diffusers commonly drop the light output by about 10-20% depending on the purity of the diffuser material. With so many factors it is important that manufacturers give true values to their products but unfortunately they do not. Some lighting products are not tested, they use the material and testing offered by the diode manufacturers.

Traditional diffusers create softer light but inherently lower the lumen output. This is all dependent on the purity of the diffuser. Light must pass through the acrylic or polycarbonate, if impurities exist it will inhibit light from passing through. This is true for Opal diffusers, micro-prism LED diffusers and what other names may be given to acrylic/polycarbonate diffuser.

Demolition of a two-storey terrace comprising 3no. retail units built c1992 fronting Dublin Road and two-storey houses dating from the late 1800s fronting Harmony Street took place on Sunday 27th November 2011.

Mr Gillan confirmed in February 2012 that an agreement and lease was in place between French company Accor to operate a 2-star ETAP hotel and a 4-star Novotel hotel. The planning application for the proposed ETAP Hotel was approved in April 2012 and ETAP entered a lease to occupy the building until 2032. Construction commenced in August 2012 and was completed early August 2013. The hotel opened on Monday 19 August 2013. The building was purchased by CBRE Global Investors for 6.6m in January 2015.

3a8082e126