Err No Launcher Gta 5

[Phoebe Sibilio]

We are on V8.1.0 and are experiencing the same thing. Project title does not have any special characters (though parent project does). Nothing described here has worked. Work around is to add any other application then change its configuration properties to match the project that you are unable to add via the usual method.

Just an addition incase the previous solutions did not help, I faced the problem of not seeing the project on the client launcher and later figured out its because I had a blank project with no windows in it. Just adding even a test window will make the project appear on the client launcher. Hope that helps!

Best Practice
It's good practice to download and install the Designer Launcher every time you install a new release of Ignition. The Designer Launcher is a separate application and is not part of an Ignition release, so it's important not to have an outdated Designer Launcher shortcut residing on your desktop

Until the point when someone finds an exploit and you didn't apply the patch since it's just a launcher. There's certainly less risk of an exploit with a smaller codebase but running out-of-date software is generally bad practice and I think particularly egregious in this case since updating the designer launcher is minimal risk to your production environment

Whenever an Application is launched from a Launcher, the Launcher will check to see if it needs an update. If the Gateway containing launched application is several revisions ahead of the Launcher, the Launcher will provide a popup notifying you that an update is available.

However manual upgrades can be performed. Simply download and run a new launcher installer from a more recent Ignition Gateway. During installation, simply set the installation directory to the same directory as the old launcher.

As of 8.0.13's bundled client/designer launcher, you'll get a prompt if you connect to a gateway that's got a significantly different version of the launcher available. Not quite auto-updates, but pretty good.
...
That aside, they only get better, so there's certainly no harm in updating

I think ultimately the issue is that of communication. Once a project gets above a certain size you will have different people controlling the gateway software installations vs those who are building the application. So there is always the chance (ok 100% certainty) that one group doesn't talk to the other about what version of software is in use. Thus is makes sense to automatically minimize the friction by getting the computers to do what they do best - talk to each other.

My test gateway is running on Ubuntu (just to see how Ignition handles linux) and this morning Ubuntu told me that there were new updates available. After doing said updates (1) I could no longer open the Inductive website in Firefox (2) Thus Ubuntu stopped me from downloading some software called Ignition HMI, that's apparently full of exploitable holes

This is on 20.04.1 LTS updated as of today. Firefox 84.0.2 (64 bit). Running in a VM under Windows 10
I just loaded youtube.com and www.wikipedia.org from firefox within this system, but I can't get to support.mozilla.com
But I've also had the firefox crash reporter pop up a few times today.
nslookup works for inductiveautomation.com and returns 52.52.32.221
But I can't ping it. Firefox fails to load, but it will redirect from the http:// to the https:// url of the site before dying.

But I can get to the correct inductive site via 2 other systems (windows and mac) so I know it's just the Ubuntu system. My guess is something was screwed up with the update, but as this is a test system I don't really care too much about that aspect.

Same problem here, I even have the same certificate on the Ignition gateway and the ssl termination point in front of it (a web application firewall). Designer launcher works directly to the gateway, but not through the WAF (SSL Certificate not found). The certificate is trusted: LetsEncrypt.

All, not sure if it has been addressed elsewhere in the forums, but Designer Launcher using Self Signed certificates on a Gateway with redundancy needs to have the Subject Alternates included in the Master and Backup gateways. It will ask to trust both certificates. There should be a note in the section stating this is required for Gateways using redundancy.

I just realized I misread the launcher code. It creates a command that adds a launcher to the main area. The file browser extension invokes that command if there is no other widget open. So if you add your widget to the main area in your activate function, the file browser will notice there is something already there and will not create a launcher tab by default.

@jasongrout I am working with aafshar. I tried adding my extension to the MainAreaWidget inside the extension activate function but this resulted in some strange behaviour. More often than not, on page refresh, the launcher is rendered on the MainAreaWidget. However, every once in a while on page refresh, my extension is rendered onto the MainAreaWidget as intended.
Is this the proper implementation of your description above?

Unfortunately, this url did not open the desired testingworkspace workspace but opened just a launcher (I assume it just opened a default workspace). Is this the correct workflow to save and open a custom workspace?

If I click on the Splunk Icon at my Splunk Web Interface I get a error message "The app "launcher" is not available " instead of the overview which got mentioned in the Splunk tutorials where you can describe your forwarded data or watch your collected data summary. After I got this error question I only can go to apps like "Search and Reporting" or "dhcpd" etc.

I've already looked to see if the "launcher" app is under etc/apps, but it's missing, even though I thought that this is a "core app" after a fresh installation. Otherwise I cant forward data from my forwarders to this Splunk master.

When the User setting for default App is set at the User level in 'Access Controls' - if the Launcher is not the default app then clicking the Splunk Enterprise Logo will always take the user back to the Default App.

I have an ELVIS II MX board for ECPI university. About 4 weeks ago it stopped allowing me to launch the instrument launcher. I attempt to bring it up by clicking it and nothing happens. There is no error message or screen flash. It does not appear in the task manager at all. I had previously been using it since June of 2017. I have uninstalled and reinstalled the NI student edition and myDAQ software suite. This has not corrected the issue. There are no real specific instructions on my school site as to what to install other than "This download enables students to install the same NI software used in campus laboratories, on their own laptops and computers. By using the serial number below, students will be able to access Student Install Options for both Multisim and LabVIEW. " I am unsure how to resolve this issue.

I am attempting to follow along with the instructions in the posit workbench admin guide for enabling SSL for launcher (following RStudio Workbench Administration Guide - Overview). We have an existing install that works with a local cluster and I am trying to make the necessary changes without breaking everything.

This is somewhat baffling because we are passing in the exact same paths for the certificate files, I've attempted changing the permissions of the certificate files and their ownership but nothing seems to work.

Typically when we see this from the Launcher, it's due to permissions issues on the certificate files in question. Can you make sure that they are set with the proper permissions and ownership as described here?
-pro/job_launcher/configuration.html#ssl-considerations

If this doesn't help, please file a ticket at our premium support site ( -us/requests/new) and we can dig further into your specific configuration - should a generalizable solution be reached we'll be sure to return here and share that.

I have finally found a solution - the issue seems to occur based on the permissions of the folder containing the certificates (originally 600). Specifically chmod 655 /etc/rstudio/cert seemed to work for me, I'm guessing g+r and or o+r might be the missing piece but I have not investigated further.

This topic was automatically closed 21 days after the last reply. New replies are no longer allowed.

If you have a query related to it or one of the replies, start a new topic and refer back with a link.

2) Setting the launcher to Node created on data-folder. This triggers my workflow once, but it fails because DamUpdateAsset is still running. (bad) Perhaps there is a way to add a wait to the launcher?

3) I tried appending my workflow to the end of DamUpdateAsset but the payload given to it becomes the "original" rendition, and I'd rather not have to jump up to the parent programatically. Also, this requires modifying or copying DamUpdateAsset, and changing the way AEM is set up OOTB.

Workflow Launcher have only 3 types of events available that too "jcr node events" and not sling ones so creating them would be difficult with a lot of trial and error and possibility multiple times invocation.

I think you should revisit decision not to write a sling event listener. It is much cleaner for your use case and you can listen to DAM_UPDATE_ASSET_WORKFLOW_COMPLETED event which is sent at the end of DamUpdateWorkflow and have a lot of power with programmatic filter and event topics to choose from for right time invocation and also payload path manipulation. This event listener can be backed up with good logging to allow comprehensive debugging.