Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Re: Offenhauser dual intake manifolds for early Ford (Monterey) $250

0 views
Skip to first unread message

mdfleming

unread,
Sep 24, 2020, 1:58:38 PM9/24/20
to

> Sale 4213377170 wrote:
>
> Offenhauser 1073 1942-1948 Ford Flathead Super Dual Intake
Manifold $250
> From the interweb:
> The Offy Super Dual intake is a better performer than regular dual.
9-1/8" carb centers. The front of the intake manifold has the
boss or flange for the generator or fan assembly to mount to. It also
has the fill and draft holes behind this flange.
> For 1942-48 Ford Flatheads
> 9-1/8" carb centers
> Has boss or flange for generator or fan assembly to mount to
> Has the fill and draft holes behind flange
> 3-3/4" tall (measured from block mount to carb base)
> 9-1/8" carb centers
>
> Offenhauser 1075 1949-1953 Ford Flathead Regular Dual Intake
Manifold $150
> From the interweb:
> Said to be its most popular flathead intake, Offenhauser's 2x2
Regular intake has closely spaced carbs. The Offy regular dual intake
accepts two 3-bolt carbs. Great addition to a street oriented engine.
Has 4-3/4" carb centers.
>
> The generator may not fit into the stock location due to the
clearance issue with the carburetor. The generator can be relocated
to the passenger side using bracket # 325-1146. If using a GM
alternator, use Speedwaymotor's chrome 916-67909 or plain 916-67910
bracket.
>
> Carb Centers: 4-3/4"
> Carb pads are angled as they were on stock 49-53 intakes
> Front drivers side accessory hole is for draft tube and measures
1.25"
> Rear drivers side accessory hole is for oil fill tube and measures
1.375"
> Notes
>
> Specifically designed to fit '49--'53 models, which allowed Offy to
move the carbs 1-inch further forward compared to the competitors
intakes. This relocation was worth 2.8 more peak horsepower over the
competitors but at the cost of 1.2 lb-ft less torque. Overall, the
Offy had slightly better overall average power and torque numbers.
This twin carb set up produces better numbers than Offy's single
four-barrel intakes.
>
> Note: If used with our progressive linkage kit, the front
carburetor will need to be set as the primary.
>
>
>
>
> Location: MontereyPrice: $250
>
>


Please PM me regarding Offy 1075 for sale. Include pics and
description of any defects. Thanks


This is a response to the post seen at:
http://www.jlaforums.com/viewtopic.php?p=302201905#302201905


0 new messages