Fix Bricked Wii Without Nand Files Rar
Kody Coste
I know.. the cb's were split on phats, ect.. but guide tells you to flash a dud nand then flash ecc back, ect.. which is pointless if you can already get xell working.. but op is having trouble probably due to no 14xxx dash files..
Dear friends, my system has come back to life. As I explained before, I had an armbian 5.14 Debian Jessy Desktop, and after a september 2018 update, when I rebooted the sistem, it didn't boot again. Before trying anything, I booted from a µSD and made an image of my system ( dd if=/dev/mmblck1 bs=10M of=/mnt/pendrive/image.img ). Then I tried the solutions proposed here, but didn't work for my system. I tried copying /boot files from 5.14 distribution and from new distributions.. I tried with the files that I found on the installation without being updated and also with the updated versions, but any combination worked for me.
try another terminal than putty, and check if you can access the console of uboot, then run the command of nand info and check if there is an output, otherwise my advice to run a VM of debian or ubuntu to follow @frank-w procedure to recover from bricked board
582128177f