Re: Dm 2610 Clock Manual
Bernd Manison
The SSL 2610 V-Gates has a powerful combination of features for your clocking and gating pleasure. In fact, there are well over 300 variations of gates, functions and modes. And many of these functions can be voltage controlled!
Sub-functions in analog mode, controls the number of outputs affected by the input CV. In Analog mode, the 2610 follows an input control voltage (CV) to produce unique combinations of output gate signals. Binary, Step and Slope functions are available. A clock output is available that produces a 1 millisecond (ms) pulse for each change of output state.
In Digital mode, the outputs change in step with the input clock. Binary, Step and Randon functions are available. This makes the 2610 very useful in creating rhythmic patterns, as well as random (no patterns) outputs. The outputs respond from DC to over 400 Hz, although
The VX-GPU2610-9 from Versa Technology is an L2+ Managed POE++ Switch offering better PoE functionality and usability. The VX-GPU2610-9 includes advanced L3 features such as Static Route that delivers better cost performance and lower total cost of ownership in Enterprise networks. It also supports Universal Power Over Ethernet (UPOE), ports 1 to 8, with a per port max. wattage of 90W and a total PoE output power of up to 740W.
The switch delivers advanced functionality in L2+ managed switch including Layer 3 static route, DHCP server, IPv6 support, LLDP, etc. It also has comprehensive security features such as IP source guard and ACL to guard your network from unauthorized access. It helps users to build on the market-leading price/performance with L2+ Managed GbE PoE switch, and provide secure, reliable and ease of use for enterprise/SMB deployments.
The DMS provides embedded functions to facilitate devices management at anytime and anywhere. Its user-friendly interface helps users to manage devices intuitively. It supports various IP device types (e.g. IP-phone, IP-camera, WiFi-AP) for end users to enhance manageability and save time/cost during installation/maintenance stages.
Universal Power Over Ethernet (UPOE), which extends the IEEE Power over Ethernet Plus (PoE+) standard to double the power per port to 90 watts, options to power IP devices with power-saving features like Power scheduling and PoE configuration.
Support protection mechanism, such as rate-limiting to protect your devices from brute-force downloadingLayer 3 SwitchingIPv4/IPv6 Static RoutingIPv4/ IPv6 Unicast: Static routingSecuritySecure Shell (SSH)SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supportedSecure Sockets Layer (SSL)SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switchIEEE 802.1X IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN, single/multiple host mode and single/multiple sessions
Dynamic VLAN assignmentLayer 2 Isolation Private VLAN EdgePVE (also known as protected ports) provides L2 isolation between clients in the same VLAN. Supports multiple uplinksPort SecurityLocks MAC addresses to ports, and limits the number of learned MAC addressIP Source GuardPrevents illegal IP addresses from accessing specific ports on the switchRADIUS/TACACS+Supports RADIUS and TACACS+ authentication. Switch as a clientStorm ControlPrevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a portDHCP SnoopingA feature acts as a firewall between untrusted hosts and trusted DHCP serversACLsSupports up to 256 entries. Drop or rate limitation based on:
Support LLDP-MED extensionsWeb GUI InterfaceBuilt-in switch configuration utility for browser-based device configurationCLIFor users to configure/manage switches in command line modesDual ImageIndependent primary and secondary images for backup while upgradingSNMPSNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM)Firmware UpgradeWeb browser upgrade (HTTP/ HTTPs) and TFTP
The Limited Warranty applies only to products sold directly by Versa Technology that can be identified as a Versa Technology product (by name, logo, purchase documentation). The Limited Warranty does not apply to (a) damage caused by accident, abuse, misuse, misapplication; (b) damage caused by unauthorized service performed by anyone who is not an authorized Versa Technology service specialist (c) a product or a part that has been modified without the written permission of Versa Technology; or (d) if any Versa Technology serial number has been removed or tampered.
Versa Technology shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to Versa Technology pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting Versa Technology within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all Versa Technology products. Products that are sent to Versa Technology for RMA service must have the RMA number marked on the outside of return packages and sent to Versa Technology prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees.
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, Versa Technology SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF Versa Technology CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. No Versa Technology reseller, agent, or employee is authorized to make any modification, extension, or addition to this warranty. Versa Technology IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH Versa Technology PRODUCTS, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state or province.
For products which are out of warranty, please call or fax in for a RMA number. Once the products for repair are received a quote will be generated for their repair. Customer approval must be obtained before work is begun in repairing or replacing the products. Once the products are repaired, payments must be made or sent for their repair costs before they are shipped back to customers. Shipping costs both to and from the customer are billed to the Customer for products which are out of warranty.
Breitling Unitime ref. 2610, 1961 - a collector's tale ...Jul 05, 2013,07:58 AM Vintage aficionados, a story you might enjoy; Eitan might remember this one ?
This seems to be the rarest of the Breitling Worldtimers - we have no production figures, but almost none come up for sale and if they do, most are in a sorry state, incorrect and/or ridiculously priced; they were expensive watches when they were launched in the very late 1950s or very early 1960s, same price levels as the Navitimer 806s - so apparently the Unitime were only produced in very small quantities .
This Unitime ref. 2610, manufactured in 1961, was actually the first Unitime I acquired, almost three years ago. Case, dial and world time dial ring were in perfect condition, it came with it's original box and the original manual - but the bezel insert was totally destroyed, rendering it almost unusable.
First I waited and searched, hoping (childishly) a NOS insert would just pop up, then the watch traveled to several restoration gurus; Craig in the US was pessimistic (and rightly so) he would find somebody to restore the bezel, Kirk Dial had tried in the past but refused to try again - so Craig serviced it and suggested to just give up on trying to "make it whole".
Then Germany, Spain - nobody had the die, nobody claimed to know how to restore the anodized aluminum insert. My many collector friends tried to help, some running around London; we thought about China, friends were checking in Geneva; others in France - nada.
There were Unitime inserts from bakelite, but these were totally off - wrong fonts, wrong material, wrong look and feel; even Aldo, the milwatch uberguru from Milano, said he knew of no possibility do do it correctly in anodized aluminum.
Years of searching, trying, waiting - here it is now with a quite correct world time bezel, surprisingly fabbed by ourselves (a small electronics manufacturer with some "handy" graphics & metalworking guys, but with absolutely ZERO watchmaking capabilities).
We painstakingly recreated the rather unique font, fabbed the inserts from 0.3mm aluminum, found the right tool to reach the correct doming, made a dozen anodized samples, tried printing and failed - in the end succeeded quite nicely with a high resolution engraving laser. Still not totally perfect (we were afraid of "doming" the anodized and engraved inserts, so the cutting depth of the laser is not totally uniform), but quite workable.
Do not ask how many man hours went into this, please.
and finally, some family pics of Breitling World Time watches; a 1955 Unitime ref. 1-260
and a 1969 Unitime AVI
Unsure if to - very respectfully - work a little bit on the hands lume, but basically: Happy Fred.