Which Visual Studio Workload should I install?

[Radcliff UMC]

I am admittedly not a programmer, but I was hoping to follow the directions to set up MonaServer2 on my Windows PC for Live streaming my church's worship service using 2 Mevo cameras (using Mevo Multicam to OBS). When I downloaded Visual Studio from the link, it then said to only install the Workload(s) that I actually need. I cannot find in the directions enough information to tell me which one.

Thank you for any help!

Christine Carman

[MonaServer]

Hi Christine!

Nice to meet you :)

You don't need to install Visual Studio if you want to use MonaServer2 on Windows, you can just use the binaries :

https://sourceforge.net/projects/monaserver/files/MonaServer/MonaServer_Win64.zip/download

This would be sufficient to stream your 2 cameras to MonaServer.

Please let us know if you need anything else.

Regards

Thomas

[Radcliff UMC]

Thank you!

I had trouble with a severe lag with the cameras (about 5 minutes!), so I was hoping by building MonaServer the other way might help fix that. My audio is a direct USB connection from our soundboard, so the video being that far off is really prohibitive to using Mevo Multicam for the 2 cameras versus just one camera. Any ideas on settings or what else might fix my lag?

Thanks again,

Christine Carman

--
You received this message because you are subscribed to a topic in the Google Groups "MonaServer" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/monaserver/9ASs88UZ3-o/unsubscribe.
To unsubscribe from this group and all its topics, send an email to monaserver+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/monaserver/5618548d-faf1-4e0c-a322-a5b5b4ff459en%40googlegroups.com.

[MonaServer]

Wow, 5 minutes is not normal, you should check your network configuration (https://help.mevo.com/hc/en-us/articles/360059357091) and ask Mevo's support if you don't find any solution.

In the meantime try to change your setup to identify the reason of this lag (try without Audio, with 1 Mevo Multicam, with a different device, try to change parameters...)

Also if there is no lag at the beginning of the stream there could be a congestion somewhere (device too slow?).

And by the way did you succeed to use MonaServer ?

And which player are using? (VLC? Something else?)

Regards

Thomas