ModelMuse

[Paul Kaweesa]

Dear all,

Am creating a groundwater flow model in modelMuse 2.8 but whenever I try to import the elevations of the layers (3 elevations), I get an error message on the second import that out of memory, and other error messages indicating incomplete application? Does ModelMuse require a lot of memory even for grid sizes of the order 40x40, 50x50? If so like how much?

Paul

[Bangshuai Han]

I don't think this is due to the memory issue. MODELMUSE can create models with much larger grid sizes. The only problem with large model is that it will run very slowly and easier to die.

You might want to check your second layer data carefully.

James

--
You received this message because you are subscribed to the Google Groups "MODFLOW Users Group" group.
To post to this group, send email to mod...@googlegroups.com.
To unsubscribe from this group, send email to modflow+u...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/modflow?hl=en.

--

Bangshuai Han, Ph.D Student
Department Environmental Resources and Forest Engineering
College of Environmental Science and Forestry - State University of New York
321 Baker Labs, One Forestry Drive, Syracuse, New York 13210 USA
315-877-6571(tel)

[Ahmed Elwan]

In the import shapefile dialog box, select import shapes as a single, multipart object. It will save memory.

--

You received this message because you are subscribed to the Google Groups "MODFLOW Users Group" group.
To post to this group, send email to mod...@googlegroups.com.
To unsubscribe from this group, send email to modflow+u...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/modflow?hl=en.

--
Ahmed Elwan
M.Sc. student
Dept. of Hydrology and Hydraulic Engineering
Vrije Universiteit Brussel
Pleinlaan 2, 1050 Brussels, Belgium
Cell phone: +32493353003
Fax: +3226293022
Email: ael...@vub.ac.be