Configure MHN to use HTTPS

[Brendan O'Connell]

After installing and everything is working well, I try to follow the MHN Lab pdf to configure https. Here are the commands:

cd /etc/nginx/sites-enabled

ln -s /etc/nginx/sites-available/mhn-https

ln -s /etc/nginx/sites-available/honeymap-https

rm /etc/nginx/sites-enabled/default

/etc/init.d/nginx restart

I should be able to run the following to look for nginx listening on various ports.

netstat -tunlp | grep nginx

It comes back with nothing. Worse, my MHN web interface no longer comes up on port 80 or 443 and I have to start all over. 

Are these instructions out of date?

Thanks

[Jason Trost]

You need to create these files: 

/etc/nginx/sites-available/mhn-https

/etc/nginx/sites-available/honeymap-https

Examples can be found here: https://github.com/threatstream/mhn/wiki/Running-MHN-Over-HTTPS

--
You received this message because you are subscribed to the Google Groups "Modern Honey Network" group.
To unsubscribe from this group and stop receiving emails from it, send an email to modern-honey-net...@googlegroups.com.
To post to this group, send email to modern-hon...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/modern-honey-network/59d398a2-80fe-4926-9c17-00169959283f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Jason Trost | VP of Threat Research | www.threatstream.com
2317 Broadway, 3rd Floor| Redwood City, CA 94063
Phone:  386.235.0078 | Twitter:  @jason_trost