For details on pricing contact:
Osiris Technology Phone: Intl +61-2-4066299
PO Box 353, UUCP: ...!seismo!munnari!osiris.oz!carolyne
Lane Cove 2066
Australia
OSIRIS ONE TECHNICAL SPECIFICATION
Processor: 10MHz no wait state NS32032 chip set including floating
point processor and memory management unit.
Memory: 2M byte parity checked triple ported memory. The CPU has one
port, 12 DMA channels with scatter gather capability use
another, while the third is dedicated to system expansion.
Four parity bits in each 32 bit word.
Hard Disk: 76M byte formatted capacity Winchester disk, 35ms average
access time.
Floppy Disk: 1.2Mbyte formatted capacity, 13cm, 96tpi double sided, dou-
ble density and dual speed.
Serial i/o: Six full modem RS232 serial channels with individually pro-
grammable baud rates up to 38.4Kbuad. Support for asynchro-
nous, synchronous and HDLC protocols. Two channels with
full duplex DMA, four with either receive or transmit DMA.
Timers: Five 16 bit programmable timer channels cascadable in pairs.
ROM: 128K bytes EPROM supplied with a system configuration edi-
tor, power up diagnostics, symbolic debugger and hardware
diagnostics.
NVRAM: 2K byte EEPROM for configuration information.
Clock: Battery backed up real time clock.
Expansion: - Additional 2M byte memory
- Additional 10 serial channels
- 6mm and 12mm streaming tape backup options
- 20cm floppy disk
- Ethernet/Cheapanet interface
- External bus interface
Power: 200-260 Volts AC, 50-60Hz, 90VA
105-120 Volts AC, 50-60Hz, 90VA
Physical Size: 100mm x 400mm x 600mm in single box size.
Shipping Weight: 18 Kgs
Environmental: Operating: 10-40 degrees C, 10-90% RH, non condensing, max-
imum temperature gradient 10 C per hour.
Storage: 0-50 degrees C, 10-90% RH, non condensing.
---
Tim Wooller, Osiris Technology ti...@osiris.oz
--
Ron Heiby use...@cuae2.ATT.COM Moderator: mod.newprod & mod.os.unix
AT&T-IS, /app/eng, Lisle, IL (312) 810-6109
Submissions should go to new...@cbosgd.ATT.COM.
Comments to the moderator should go to newprod...@cbosgd.ATT.COM.
Requests for information should go to the author of the message.