Does anyone have a g-code listing for the mod-t

[r.d. terramir]

Hi gals and guys,
Does anyone have a complete list of g-code the mod-t uses?
Because I wonder if I can override the Z-height in the starting code. Since we have problems getting the 1st layer to stick in 0.1 and 0.2 layer heights hell I can't get 0.3 to stick without painters tape if I could give a starting g-code after the wipe of - G0 Z0.1;
G92 Z0.15; this setting make the printer think it's a tiny bit further from the bed.
G0 Z0.1;
The printer should be able to stick the 0.1 and 0.2 layer heights then.
Let me know if G92 is a valid G-code on the mod-t
terramir

[Dan Shoop]

Mod-t users should not be having issues printing with 0.1, 0.2, or other initial starting heights. I can confirm these all work fine (even a 0.05 base height) on multiple Mod-t’s I own. I made several suggesting for trying to help you previously.

You now say “we” suggesting that you as well as others are having issues? Since I’m unable to repeat this could you please confirm that you’re experiencing this on multiple Mod-t’s along with one or more other owners, what you’re using for the starting / ending gcode and how you’re slicing?

You previously confirmed that the test print from the Mod-t Printer app was printing correctly so this suggests the printer is working correctly and some other issue is likely the cause.


-d

> --
> You received this message because you are subscribed to the Google Groups "MOD-t" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to mod-t+un...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/mod-t/fbcc8c03-532e-4b85-bdb4-1e09c4fc25d3%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

[Efrain Perez]

Perhaps you could find what you are looking for here:

https://github.com/tripflex/MOD-t/

Regards.