New Matter not printing

[Oberon Blood]

HI Friends

Since an hour ago, after printing during the morning, i try to change some values in Cura, layer height and print speed, now I have this problem, the mod-t will not do anything. As soon as a gcode file loads into the printer, and i hit the button to print, it immediately says "printer disconnected" and it stops.

I uninstalled mods Printer Tool and deleted logs, I re-installed and nothing, is disconnected ss soon as a gcode file loads into the printer, and i hit the button to print, it immediately says "printer disconnected" and it stops and a test print using the Mod-T desktop printer tool also fails at this point with error "there was an error during the test print".

I reloaded the profile in Cura and nothing

Please help!!

[Dan Shoop]

Can you verify that the front light on the printer is lit and the printer is properly plugged in? 

Have you tried a replacement, known good USB cable and you’re assured the USB ports on your computer are working properly? 

I’ll presume a yes to the above since you’re able to send a code file. 

I’d say that if the printer fails to successfully produce a test print using “Run Test Print” in the Mod-T Printer Tool app that the printer has a fatal fault. There should be a “Printer Logs” button in the app to print, what do the logs tell you?

-d 

Just another mod-t owner

-----

Dan Shoop

dsh...@gmail.com

--
You received this message because you are subscribed to the Google Groups "MOD-t" group.
To unsubscribe from this group and stop receiving emails from it, send an email to mod-t+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/mod-t/d07e9e47-6210-4228-97c8-b27ec7e74f5c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Saud]

Hi,

This happened to me many times, it was almost always caused by the print carriage being stuck. There's a gear behind the carriage that you can turn so that you can unstuck it, give it a try.

[Mark Kobel]

I'm a new owner of an old MOD-t. Same problem, turning the rear gear solved it. Thanks, Saud!