nennoct faygin jaenele
Shanta Plansinis
Hey, Game keeps crashing for me after the server crash yesterday. As soon as I log in it doesn't crash for around 10-12 minutes but it crashes after that. I have tried re-installing Rage MP and it is still the same. I can't figure out the problem.
This is one of the actual codes I found in mainlogs. If you need more of the mainlog please let me know I will attach as much of it I can.
SE EXCEPTION_ACCESS_VIOLATION (0xc0000005) at address 0x00007FFCB03D13E2 (0x213e2) thread 21992 inside C:\WINDOWS\SYSTEM32\ntdll.dll loaded at base address 0x00007FFCB03B0000 Invalid operation: read at address 0x40 This is the actual code found in mainlogs.
I have tried many things trying to resolve the issue but I kept failing. I will list the things I have already tried and didn't work.
1. Turning off firewall.
2. Turning off Anti Virus
3. Checking Windows Update
4. Checking all drivers updates
5. Windows Repair through Microsoft ISO File
6. Contacted Microsoft Support and explained him, after checking everything he said it should be the issue of the Application you are using.
7. Deleted all resources except Updater and then updated it.
8. Deleted Rage MP and re downloaded and installed it.
9. Deleted Rage MP again and downloaded it outside GTA V folder.
10. Tried too many PC restarts while doing the above checks.
It has been more than two days and the problem is still there. I think it crashes on exact number of minutes and seconds every time, although I haven't timed it but I am sure it crashes right after 10 mins.
If you need any additional information please let me know and I will provide it as soon as I can.
I will be really really thankful if I can get a solution for my problem. Thanks!
I have resolved the issue. It was actually not Rage MP issue, it was the graphic driver. I downgraded my graphics driver to previous one and it actually worked for me. Just leaving this comment so that if someone else ends up here searching for the solution so yeah it should work. Just downgrade your graphic driver and it will solve the problem.
The topic can be locked and archived. Thanks!
If you are sure your server resources are completely downloaded and free of any errors, you may backup the server resources before doing this, to avoid having to download them all over again. You will have most of the server resources already installed, but being that the above link is not the most up to date, RAGE MP will download a few more files from the server. Launch the game using the steps at the beginning of this guide. In the client_resources folder, click on the cb242ee11d52ccd84309050503ab5242 and press Shift + Del. Click Yes when asked Are you sure you want to permanently delete this folder?ĭownload the server resources via this link. Option 1 (Downloading via RAGE MP Client) In the opened config.xml, change 10_mNwuchuQ4ktWbR8d2N5jUzRt to prerelease Click OK.Ĭlose the remaining RAGE MP window that would still be open from using the steps at the beginning of this guide.Ĭlose the Rockstar Games Launcher: Click The Icon in the Bottom Right of Your Taskbar > Right Click Rockstar Games Launcher Icon > Exit You will get an error that your GTA V version is not supported. In the opened config.xml, change prerelease to 10_mNwuchuQ4ktWbR8d2N5jUzRt. Right Click config.xml > Edit. If you have RAGE MP installed in another directory such as Program Files (x86), you may need to do Start > Notepad (Type it in for Windows) > Right Click > Run as administrator This is because when it comes to save the file after editing, you may need administrative permissions.Switch RAGE MP Development Channels Temporarily
- Start > Enable Xbox Game Bar (Type it in for Windows 10).
Now, if your game launches, but crashes at Loading Server Resources (just before Finishing Handshake and getting to the log-in screen), try the following. With a little patience, eventually the first instance of RAGE MP gets to the log-in screen. Keep the second instance of RAGE MP as the active window and let the first instance of RAGE MP do what it needs to in the background.
Once the Rockstar Launcher window appears (white Rockstar logo with animation), launch RAGE MP as administrator a second time from the RAGE MP install directory ( Right Click updater.exe > Run as administrator). Keep File Explorer open in your RAGE MP install directory.Ĭonnect to GTA W by selecting GTAW - Roleplay 2.0 the server list. Right Click updater.exe > Run as administrator.Thanks to Start > Right Click Epic Games Launcher (Type it in for Windows 10) > More > Run as administrator. Use the second one to connect to GTA W by selecting GTAW - Roleplay 2.0 the server list. You will now have two instances of RAGE MP open. Then Right Click updater.exe > Run as administrator a second time. Right Click updater.exe > Run as administrator. Allow it to launch.Right Click Launcher.exe > Run as administrator.īrowse to the install directory for RAGE MP. If you didn't change the location on the previous install, the default is C:\RAGEMP. Default is C:\Program Files\Rockstar Games\Launcher. Generally speaking, if launching just RAGE MP alone causes crashes or other issues with launching into the game, always use one of the following methods to connect to the server:īrowse to the install directory for the Rockstar Games Launcher.
So, after trying each of the fixes in the following section (Crashing at Loading Server Resources), if you launch the game and it still crashes, try launching the game using the steps below a second time just to confirm. However, every so often the game may still crash. Note: These two methods work most of the time.
CHANGELOG 1.4.0.0
Updated for RPH 0.47 and GTAV 1.877.1. Works with RPH 0.44 or higher.
Default setup attributes for policecar & policebike to allow overriding of default siren setup used (see documentation for more info).
Major behind the scenes changes of how sounds are loaded.
GRANGER siren preset for fbi2 & pranger added by default.
The Horn now has a slight fade out effect instead of stopping abruptly.
Your siren can now stay on when you leave your vehicle if you don't mute it (this can be disabled in the INI file).
Added a button/key to allow you to cycle to your next siren. An INI option determines if the Off state is included in the cycle.
Various bugfixes, improvements and optimisations.
Sorry for the bother, but new to GTA5 modding though ive done tons on Skyrim, but they make so many things to make that easy. Im finding GTA is more difficult. Need to pick you brain here, so sorry if this is long.
Your mod is the first RAGEHook mod ive installed or have attempted to install anyways. Ive installed all the common Prerequists for many mods. Ive only installed a few basic AVI and script based mods so far, nothing major or any other Rage based ones, and they all seem to work flawlessly. Following your well written install instructions for this mod, Ive done everything to a T, and might add, done it twice now following both written instructions and your tutorial video. However im running into a major crashing issues. Running RageHook, game loads and plays fine. First go around I added your plugin into the startup option in Rage to run the plugin on game start. Infinite loop of plugin crash. I deleted everything, and reinstalled the mod, this time did not add to the startup. Get in game and manually executed the plugin via the Rage console. Infinite loop of Plugin crash. I cant seem to find the cause of it or that any of the few small script mods I have that would be effecting your plugin. I have the Rage Log I'll copy below. Sorry if I sounf so new to this. Hopefully the log might shed some light. Game runs fine till I try to execute this plugin with RAGE, and as I said, its my first RAGE based mod and I might just have something configured wrong. I havnt messed with any files with Rage itself or the game other than my few small mods. Any help appreciated.
Out of date again no thanks to R* breaking things when they update. I downloaded SirenMastery 1.4.3.1 by Albo1125 - Min.RPH 0.51 from your recent update, but the plugin keeps crashing no matter how many times I load it. It won't tell me my either.
Please help:
I am using siren mastery and ELS having taken all the necessary steps to make the vehicle work by changing the ELS XML files. I get into game and spawn an emergency vehicle and no siren Mastery UI appears. I look in the Rage console and i see the following:
I would like a little help please-
No matter what key I assign to "ToggleSirenSoundKey", the siren won't mute :(
Any help would be greatly appreciated as I like doing a lot of routine traffic stops with lights only. Otherwise I can only control muting through the 'N' Interaction Menu.
wow, what a solid mod. installation instructions were great, documentation is great, i didn't even have openiv installed but it was still EZ. for me, this is up there in terms of the greats like simple native trainer. this will definitely help me add another layer to my RP and extend gameplay. thanks so much!
Hi Albo, Thanks for the mods and tutorials, a massive help to a nube. It might help if you make it clear for nubes like me that Siren Mastery allows the user to change engine sounds without losing vehicle sirens in LSPDFR. That was a game changer, for me. Thanks again, mate, please keep up the good work.
c01484d022