Rtmp transmission case

[안봉봉]

Hello.
I downloaded misterver 3.6.1 version and am testing it.

I'm conducting a test to send out the rtmp protocol using 8080 ports. So, in the Protocol tab, we changed the http port to 80 and added the rtmp protocol using 8080 ports in addition to the existing rtmp protocol using 1935.

After that, you push the stream to the outside, but if you push it to the wowza server, it works well, but if you send it to naver tv, a Korean stream broadcaster, it is not transmitted normally.

Example)
wowza > mistserver > wowza (OK)
wowza > mistserver > naver tv (FAIL)

Is there any restriction on the platform that can be pushed on the mistserver?

*Naver TV URL
: https://chzzk.naver.com/

Thank you.

[Balder Vietor]

Hey,

Thanks for the report!

That is a known issue for 3.6.1. There was a non-standard reply from Naver which caused some issues.

We did do a change to compensate for this behaviour, but we'll need to upstream it to the main MistServer branch.

I suspect we should have the time for this next week, which would make it just in time for an planned upcoming release as well. I'll update this when we've added it to the development build should you wish to test it ahead of release.

Best,

Balder Vietor | Supreme tester

e: balder...@mistserver.org

--
You received this message because you are subscribed to the Google Groups "Mistserver.org" group.
To unsubscribe from this group and stop receiving emails from it, send an email to mistserver+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/mistserver/58476030-5caf-4604-b78b-a0cfbe142525n%40googlegroups.com.