En 60730-1 Pdf

[Emigdio Binet]

Dueto growing environmental awareness, authorities across the world are expediting the development of EV-related policies and regulations. Many governments are even taking the lead in promoting the construction of charging stations and other infrastructure closely related to their development.

The energy management required by charging stations necessitates an increase in stable power supply, energy conversion and reasonable and balanced energy distribution during charging as well as the ability to monitor energy efficiency and cost control. Given these needs, it is increasingly important to place equal emphasis on energy efficiency and safety during charging.

LITEON Technology is the first manufacturer to partner with UL Solutions and earn the certification for energy management equipped with EV charging equipment. As such, the two companies worked toward certification of compliance with the UL 60730-1 Standard for charging stations through continuous communication and exchange of technologies. Finally, they managed to reach a consensus on this issue. This process took a lot of effort: from jointly determining energy management and safety function requirements to performing framework system design and detailed modular design. They evaluated whether charging stations could meet energy management, distribution and safety requirements in different usage scenarios through appropriate test items according to the requirements of UL 60730-1 and completed the compliance certification for energy management equipment.

IEC 60730-1:2010 applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use, including controls for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard also applies to the inherent safety; to the operating values, operating times, and operating sequences where such are associated with equipment safety, and to the testing of automatic electrical control devices used in, or in association with, household or similar equipment. This standard is also applicable to controls for appliances within the scope of IEC 60335-1 as well as controls for building automation systems within the scope of ISO 16484-2. The principal changes in this edition as compared to the previous edition are as follows:

- changes to the low temperature test requirements for in-line cords;

- revision to the pollution degree for the environment surronding contacts;

- addition of the use of screwless terminals on printed circuit boards and revisions to creepage distances;

- additions of CISPR 11 EMC requirements;

- incorporation of EMC test levels from IEC 60335 series;

- additional testing for flexible cords;

- revisions to the requirements for resistance to heat, fire and tracking including replacement of clause 21 and Annexes F and G;

- new Annex T for additional requirements for non-SELV supplied sensor cable or cord;

- new requirements in H.27.1 for first and second fault approach to ensure functional safety;

- incorporation of software techniques from IEC 61508-3 in H.11.12;

- replacement of Annex D (Canada and USA) with reference to UL 746C;

- updates to the references and bibliography;

- the keyword index was deleted.

The National differences and Group differences, National Deviations and Special National conditions (SNC), are based solely on information provided to the Secretariat by the IECEE Member Bodies and/or NCBs and other sources. The IEC/IECEE is not responsible for, nor will it take any position related to, the accuracy or validity of the information provided. To verify the current status of this type of information, we recommend contacting the Member Body (MB) or National Certification Body (NCB) of the relevant country.

EN IEC 60730-1 applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. The requirements for applicable devices under the Low Voltage Directive 2014/35/EU can be met using this as an applicable standard, complaint with manufacturers risk assessment.

This standard is applicable to controls for building automation within the scope of ISO 16484. EN IEC 60730-1 also applies to automatic electrical controls for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. An example would be controls for commercial catering, heating and air-conditioning equipment.

EN IEC 60730-1 is also applicable to individual controls utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non-electrical outputs. This standard is also applicable to relays when used as controls for EN IEC 60335 appliances. This standard is intended to be used for the testing of any stand-alone relay which is intended to be used as a control of an appliance according to EN IEC 60335-1. It is not intended to be used for any other stand-alone relay, or to replace the IEC 61810 series of standards.

This International Standard applies to the inherent safety, to the operating values, operating times, and operating sequences where such are associated with equipment safety, and to the testing of automatic electrical control devices used in, or in association with, equipment and is also applicable to the functional safety of low complexity safety related systems and controls.

Additional examples of equipment or devices applicable for this standard include automatic electrical controls, mechanically or electrically operated, responsive to or controlling such characteristics as temperature, pressure, passage of time, humidity, light, electrostatic effects, flow, liquid level, current, voltage, acceleration, or combinations thereof.

we are performing industry safety tests for our equipment and the used device is part of our critical overheat safety. Our safety lab is asking for supporting documents for this part with regards to UL873 and UL60730-1, under UL file E232195.

I dont have these documents myself, but I have reached out to our internal TIer who handles all the UL certifications, so I will wait for her response and send you the documents if I am able to (and if we have them at all). I hope to have that from her by the end of this week, so I will reply back on this thread once I have an answer.

Alright I was able to find what you are looking for. Do you have an NDA with TI? I think I can still send it to you over email without one, but I need to check. Once I get confirmation that I can email it to you, I will get your email from your E2E profile and close the thread. That OK?

Electrada's mission is to deliver comprehensive service for fleet operators involves integrating hardware, site development, software, and vehicle expertise. For Vanderbilt University's project, rapid operational readiness post-commissioning was vital to avoid disruption to the campus community.

In the context of EV chargers, oversubscription can be defined as installing more EV charging power than supported by the site's breaker, panel, or transformer. In practical terms, it means having a charging capacity that exceeds the nameplate capacity that the grid equipment can supply, allowing for scalability and flexibility in the face of dynamic grid constraints. This unique approach solves the most critical challenges for EV charging operators.

Oversubscription emerges as a critical factor for the success and efficiency of EV charging sites. During charger installations, site owners must ensure that the grid infrastructure can handle the power demands of the new stations. However, grid constraints often become bottlenecks, causing delays in project timelines. By oversubscribing - installing more chargers the grid can fully support - projects can move forward without the lengthy utility improvement process. While this may limit simultaneous use at maximum capacity, effective load management strategies optimize resource utilization, minimizing wait times and facilitating faster, more flexible deployment of EV charging infrastructure.

For example, a site installing ten 100 kW chargers requires equipment supporting 1,000 kW. With oversubscription, you could reduce the capacity needed to 700kW or even lower. In essence, oversubscription facilitates a faster and more flexible deployment of charging infrastructure.

Underwriters Laboratories (UL) is an independent safety science company and the leading safety science organization that specializes in testing, inspection, certification, and auditing of products to ensure safety and performance in the industry. It plays a significant role in the EV charging industry to help companies develop scalable and reliable technology while maintaining a very high safety standard.

UL 60730-1 is a standard developed by Underwriters Laboratories. This certification defines the reliable automatic electrical controls for electric equipment. Among others, it describes safety and test procedures for automatic controls of electric equipment, ensuring that these controls meet specific safety criteria. While it can be applied for EV charging stations (AC and DC), it covers many devices, such as thermostats, timers, and others.

UL 60730-1 certification plays a crucial role in ensuring the safety and reliability of electric vehicle (EV) charging systems, particularly when it comes to oversubscribing grid connections. Breakers and other electrical equipment, designed to prevent excessive power draw from the grid, adhere to UL codes for added safety. An energy management system compliant with UL 60730-1 is an additional layer for effective load management. This certification ensures the system meets stringent safety standards, allowing companies to safely and reliably oversubscribe grid connections.

3a8082e126