mininet-wifi-discuss

Hello, I encountered this problem with Mininet: (2000.00Mbit 1ms delay) (1000.00Mbit 1ms delay) ***

Hi Ramon, thank you so much! Your fix helped me a lot — everything works now. Best regards, Elena Il

Hello Beatriz, I'm glad to hear that you're using Mininet-WiFi in your thesis :). > I

This is a hardware resources issue. Em qui., 23 de out. de 2025 às 14:02, ELENA VENTURA <

Hi Ramon, I've realized the problem wasn't actually what I thought. Thanks a lot for your

Dear ONOS and Mininet-WiFi Research Community, I'm Gayan Jayasekara, and I have recently

It is not implemented yet. Em seg., 13 de out. de 2025 às 08:19, GANLIN TANG <qlw...@gmail.com

> car1 iwconfig -> Bit Rate=13 Mbit/s Tx-Power=1 dBm > Even though I explicitly set txpower=

> For 802.11be (EHT) with multi-link operation, what are the valid channels per band (2.4, 5, and

Hi, I tried your suggestion with xterm and it worked! So the issue was exactly what you suspected:

Hello: I have test some condition about the adhoc node throughput. There are some confused: In the

It's working, good job and really thanks for the patience. 在2025年9月24日星期三 UTC+9 19:27:09<

My confusion stemmed primarily from getting confused by the CCA threshold getting exceeded before the

after running $ git clone https://github.com/ramonfontes/containernet.git $ cd containernet $ sudo

Hi I am using https://github.com/intrig-unicamp/mininet-wifi/blob/master/examples/vanet-sumo.py to

thank you I see it is fine now I think. 15 Ağustos 2025 Cuma tarihinde saat 14:21:31 UTC+1 itibarıyla

Hello, Any WiFi adapter that supports mesh point mode in Linux should generally be compatible. Em seg

Hello, I'm working on a Mininet-WiFi simulation and have a question about dynamic network

> 1. Intra-Network Ping Failure > When I attempt to ping a station from its associated access

The SSID must be the same if you want to have seamless handover. Em qui., 17 de jul. de 2025 às 06:01

What do you mean with mobility.draw()? Em qui., 17 de jul. de 2025 às 06:01, 22029106 Nguyễn Trương

It works well now Thanks a lot Vào lúc 15:05:34 UTC+2 ngày Thứ Bảy, 5 tháng 7, 2025, ramonre...@gmail

Hello, I hope you're doing well. I've been testing the code from your repository for

Hello, I am trying to build an SDN network with multiple subnets, but it's not working for me. Is

This is a Python-related issue. If the message indicates that the packaging module is missing, the

> Yes, I've already tried using simplewifitopology.py several times, but it doesn't

Please take a look at the control plane, especially the flow timeout settings. We've already

Hi, I think I do have problem of setup of 80211p indipendecies as well, I have python issue I suppose

I checked Check Interfaces: Verify wireless interfaces and their configuration:with sta1 iwconfig and

Hello: I'm a new member in mininet, I try to make ecn working in the program, but it seem not