Micro2440 schematics

[nooarm]

Hi,

I'm looking to design a custom carrier board that works with the
Micro2440. I'll be similar to the Micro2440-SDK board with a few
components added/removed. So I'm thinking maybe I should start with
the schematics for the Micro2440-SDK. The schematics that we can
download from FriendlyArm are in PDF format. Anyone knows if they're
also available in the original format, Altium Designer, as well?

Thanks.

[Charles Springer]

Hello.

They are on our downloads page. I have attached the Mciro2440 and the SDK schematics.

Cheers,
Charlie

--
Industrial ARMWorks
www.andahammer.com
253 851-0227

[Bill Sargent]

I think he wants them them in something other than PDF format.

Bill

[Charles Springer]

They are on the DVD in Protel SE but they will not open without Protel with Chinese fonts. I can't do it. Watterott opened them and got rid of Chinese for me on the Mini2440. He has a Protel that will do it.

-- Charlie

[Richard Pham]

Hey Charles, thanks for helping me out, again (I'm the same guy that sent you an email on the same topic) :)

 

Anyways, are you suggesting that they're available from the DVD that comes with the Micro2440SDK?  I believe I did look but didn't see them there.  Assuming that I can get Protel with Chinese fonts, would you be able to send them?

Thanks.

[Charles Springer]

Yes, we remove them for our DVD (The Chinese DVD used to have a pirate copy of Protel that would not run on a PC set up for English or some sort of problem, and still has complete scans of copyrighted Linux books). I can send them.

-- Charlie

[Sergio A. S. de Aguiar]

It would be much better if you put the pcb / schematics files in a files
repository, for all.

cheers

>> www.andahammer.com <http://www.andahammer.com/>
>> 253 851-0227 <tel:253%20851-0227>
>
>
>
>
> --
> Industrial ARMWorks
> www.andahammer.com <http://www.andahammer.com/>
> 253 851-0227 <tel:253%20851-0227>
>
>
>
>
>
> --
> Industrial ARMWorks
> www.andahammer.com <http://www.andahammer.com>
> 253 851-0227

[Bill Sargent]

Why? They're on a web page "for all"... And so far there are no needs
for a community effort to alter them, so far as I know.

[Sergio A. S. de Aguiar]

Yep, but they are in pdf format, aren't?
We're asking for an editable format, if possible.
You can read below: "Yes, we remove them for our DVD..."

cheers

[Richard Pham]

Hi Charles,

 

It would be great if you could send them.  I hope I don't get the PDF this time ;)

 

Should I be expecting them in my mail box?

 

Thanks,

Richard

[Sergio A. S. de Aguiar]

Me too, if possible.

> <mailto:rp0...@gmail.com <mailto:rp0...@gmail.com>>>

> wrote:
>
> Hey Charles, thanks for helping me out, again (I'm
> the same guy
> that sent you an email on the same topic) :)
> Anyways, are you suggesting that they're available
> from the DVD
> that comes with the Micro2440SDK? I believe I did
> look but didn't
> see them there. Assuming that I can get Protel
> with Chinese
> fonts, would you be able to send them?
> Thanks.
> On Fri, Apr 8, 2011 at 10:19 AM, Charles Springer
> <armw...@gmail.com <mailto:armw...@gmail.com>

> <mailto:armw...@gmail.com

> <mailto:armw...@gmail.com>>> wrote:
>
> They are on the DVD in Protel SE but they will
> not open
> without Protel with Chinese fonts. I can't do
> it. Watterott
> opened them and got rid of Chinese for me on
> the Mini2440. He
> has a Protel that will do it.
>
> -- Charlie
>
>
> On Fri, Apr 8, 2011 at 9:45 AM, Bill Sargent
> <bi...@station51.net <mailto:bi...@station51.net>

> <mailto:bi...@station51.net

> <mailto:bi...@station51.net>>> wrote:
>
> I think he wants them them in something
> other than PDF format.
>
> Bill
>
>
> On 4/8/2011 6:40 PM, Charles Springer wrote:
>
> Hello.
>
> They are on our downloads page. I have
> attached the
> Mciro2440 and the SDK schematics.
>
> Cheers,
> Charlie
>
> On Thu, Apr 7, 2011 at 5:41 PM, nooarm
> <rp0...@gmail.com <mailto:rp0...@gmail.com>

> <mailto:rp0...@gmail.com

> <mailto:rp0...@gmail.com>>> wrote:
>
> Hi,
>
> I'm looking to design a custom
> carrier board that
> works with the
> Micro2440. I'll be similar to the
> Micro2440-SDK
> board with a few
> components added/removed. So I'm
> thinking maybe I
> should start with
> the schematics for the
> Micro2440-SDK. The schematics
> that we can
> download from FriendlyArm are in
> PDF format. Anyone
> knows if they're
> also available in the original
> format, Altium
> Designer, as well?
>
> Thanks.
>
>
>
>
> -- Industrial ARMWorks
> www.andahammer.com <http://www.andahammer.com/>
> <http://www.andahammer.com/>

> 253 851-0227 <tel:253%20851-0227> <tel:253%20851-0227>

>
>
>
>
>
> -- Industrial ARMWorks
> www.andahammer.com <http://www.andahammer.com/>
> <http://www.andahammer.com/>

> 253 851-0227 <tel:253%20851-0227> <tel:253%20851-0227>

>
>
>
>
>
> --
> Industrial ARMWorks
> www.andahammer.com <http://www.andahammer.com/>

> <http://www.andahammer.com <http://www.andahammer.com/>>
> 253 851-0227 <tel:253%20851-0227>
>
>
>
>

[Charles Springer]

Where should we put them? I don't want to put Chinese Protel files on our web site.

-- Charlie

[Sergio A. S. de Aguiar]

Ok, send to me and I will let in my site, if you want.

> <mailto:rp0...@gmail.com

> <mailto:rp0...@gmail.com>>> wrote:
>
> Hey Charles, thanks for helping me out, again
> (I'm the same guy
> that sent you an email on the same topic) :)
> Anyways, are you suggesting that they're
> available from the DVD
> that comes with the Micro2440SDK? I believe I
> did look but didn't
> see them there. Assuming that I can get Protel
> with Chinese
> fonts, would you be able to send them?
> Thanks.
> On Fri, Apr 8, 2011 at 10:19 AM, Charles Springer
> <armw...@gmail.com <mailto:armw...@gmail.com>

> <mailto:armw...@gmail.com

> <mailto:armw...@gmail.com>>> wrote:
>
> They are on the DVD in Protel SE but they
> will not open
> without Protel with Chinese fonts. I can't
> do it. Watterott
> opened them and got rid of Chinese for me
> on the Mini2440. He
> has a Protel that will do it.
>
> -- Charlie
>
>
> On Fri, Apr 8, 2011 at 9:45 AM, Bill Sargent
> <bi...@station51.net <mailto:bi...@station51.net>

> <mailto:bi...@station51.net

> <mailto:bi...@station51.net>>> wrote:
>
> I think he wants them them in something
> other than PDF format.
>
> Bill
>
>
> On 4/8/2011 6:40 PM, Charles Springer
> wrote:
>
> Hello.
>
> They are on our downloads page. I
> have attached the
> Mciro2440 and the SDK schematics.
>
> Cheers,
> Charlie
>
> On Thu, Apr 7, 2011 at 5:41 PM,
> nooarm <rp0...@gmail.com <mailto:rp0...@gmail.com>

> <mailto:rp0...@gmail.com

> 253 851-0227 <tel:253%20851-0227> <tel:253%20851-0227>

>
>
>
>
>
> --
> Industrial ARMWorks
> www.andahammer.com <http://www.andahammer.com/>

> <http://www.andahammer.com

[Charles Springer]

Sergia is hosting the Protel data base files at www.ssaguiar.com/Arm_Protel_files/  There are three on the latest DVD so maybe one is the parts library.

-- Charlie

[Richard Pham]

Database files look good.  Thanks for helping guys.

[Christiaan van Schalkwyk]

Hi 

I can't see these files, it appear as if the company removed their website, or stopped paying for it to be hosted.

Does anyone still have these files available?