2700c

[Michael Rosiles]

TheTransSteel 2700c power source is fully digitized, microprocessor-controlled inverter

power source. Modular design and easy system expansion options ensure high flexibility.

The devices are designed for steel welding.

principle of operation

The central control unit of the current sources is coupled to a digital signal processor.

Central control unit and signal processor control the entire welding process. During the

welding process, actual data is constantly measured and changes are immediately responded

to. Control algorithms ensure that the desired nominal state is maintained.

The device has the safety function Limitation of the power limit. This allows operation of

the power source at the power limit without compromising process safety.

applications

The devices are used in trade and industry: manual applications with classic steel,

galvanized sheets. The field of application of the current sources TST 2700c is mainly

in the steel thin sheet metal sector (light steel construction). Repair, maintenance,

and assembly in shipyards, at automotive suppliers, workshops or in furniture making

are among the typical applications. The power sources TST 2700c thus themselves in

their performance class between trade / trade and industry.

The TransSteel 2700c is a compact yet powerful multiprocess welding machine that is perfectly suited for use on construction sites, shipyards, plant maintenance and in workshops. The TransSteel 2700 is ready for use in just three steps: select the wire, wire diameter and gas and start welding.

A vendor in India suggested the Nokia C201, which we can get for about $86

USD. We have to buy some quickly. If somebody could quickly confirm

this model will work for us and/or if there are any thoughts on if there is

a better model, please let me know.

This is sad about the discontinue of nokia 2700c. For those who may need an

urgent replacement can try the 5130c. It works just fine for the application

that is running on 2700c. The same jar can run on both models.

This is sad about the discontinue of nokia 2700c. For those who may need an urgent replacement can try the 5130c. It works just fine for the application that is running on 2700c. The same jar can run on both models.

A vendor in India suggested the Nokia C201, which we can get for about $86 USD. We have to buy some quickly. If somebody could quickly confirm this model will work for us and/or if there are any thoughts on if there is a better model, please let me know.

Here's a list we started on a previous conversation on this listserv. I

don't know if all of these still are supported, but these Nokias have all

been used to run CommCare at some point in the past:

The Nokia C2-01 device specifications (link below) imply that it has

the right JSR's, and enough heap and jar size to run CommCare with no

problem. It's probably the device we're looking for. It also seems to

imply that there might be a GPS in there (The Location JSR is

included)

The Operating Instructions must always be at hand wherever the device is being used. In addition to the Operating Instructions, all applicable local rules and regulations regarding accident prevention and environmental protection must also be followed.

For the location of the safety and danger notices on the device, refer to the section headed "General" in the Operating Instructions for the device.

Before switching on the device, remove any faults that could compromise safety.

Your personal safety is at stake!

The device is intended exclusively for the welding process specified on the rating plate.

Utilization for any other purpose, or in any other manner, shall be deemed to be "not in accordance with the intended purpose." The manufacturer is not responsible for any damage resulting from improper use.

Operation or storage of the device outside the stipulated area will be deemed as not in accordance with the intended purpose. The manufacturer accepts no liability for any damage resulting from improper use.

Do not undertake welding in areas at risk of fire and explosion, or on sealed tanks, drums, or pipes if these have not been prepared in accordance with corresponding national and international standards.

Ensure suitable personal protection with dry temporary backing or cover with sufficient insulation against the ground potential. The temporary backing or cover must completely cover the entire area between the body and the ground potential.

All cables and leads must be secured, undamaged, insulated, and adequately dimensioned. Replace loose connections and scorched, damaged, or inadequately dimensioned cables and leads immediately.

Before every use, check power connections for secure fit by hand.

In the case of power cables with bayonet connectors, turn the power cable by at least 180 around the longitudinal axis and pretension.

The open circuit voltage of a welding system may double, for example, between the electrodes of two welding systems. Touching the potentials of both electrodes at the same time may be life-threatening in some cases.

Operation of the device on a grid without a ground conductor and on a socket without a ground conductor contact is only permitted if all national regulations for protective separation are observed.

Otherwise, this is considered gross negligence. The manufacturer accepts no liability for any damage resulting from improper use.

Observe the following when using power distribution boards, twin-head mounts, etc.: Even the electrode of the welding torch/electrode holder not in use carries electric potential. Ensure that there is sufficient insulation when the unused welding torch/electrode holder is stored.

In certain cases, even though a device complies with the standard limit values for emissions, it may affect the application area for which it was designed (e.g., when there is sensitive equipment at the same location, or if the site where the device is installed is close to either radio or television receivers).

If this is the case, then the operating company is obliged to take appropriate action to rectify the situation.

If the device is equipped with a carrier belt or handle, then this is used exclusively for transport by hand. The carrier belt is not suitable for transport by crane, counterbalanced lift truck, or other mechanical lifting tools.

All lifting equipment (belts, buckles, chains, etc.), which is used in association with the device or its components, must be checked regularly (e.g., for mechanical damage, corrosion, or changes due to other environmental influences).

The test interval and scope must at least comply with the respective valid national standards and guidelines.

There is a risk of colorless, odorless shielding gas escaping without notice if an adapter is used for the shielding gas connection. Use suitable Teflon tape to seal the thread of the shielding gas connection adapter on the device side before installation.

Always use suitable shielding gas cylinders for the application in question and the correct matching accessories (controller, hoses, and fittings, etc.) Only use shielding gas cylinders and accessories that are in good condition.

Take care to ensure that the applicable national and regional guidelines and accident prevention regulations are observed when transporting the device, especially guidelines concerning hazards during transport and shipment.

It is essential to conduct a visual inspection of the device to check for damage after it has been transported but before commissioning. Have any damage repaired by trained service technicians before commissioning the device.

Cooling Liquid FCL 10/20 is not flammable. The ethanol-based coolant is flammable in certain conditions. Only transport the coolant in closed original containers and keep away from sources of ignition.

To comply with European directives and national law, waste electrical and electronic equipment must be collected separately and sent for environmentally-friendly recycling. Used devices must be returned to a distributor or an approved collection and recycling facility in your area. Proper disposal of used devices promotes the sustainable recycling of material resources. Ignoring this may have potentially adverse effects on the environment and your health.

Packaging materials

Materials collected separately. Check the regulations in your area. Reduce the volume of cardboard.

Text and illustrations were accurate at the time of printing. Fronius reserves the right to make changes. The contents of the Operating Instructions shall not provide the basis for any claims whatsoever on the part of the purchaser. If you have any suggestions for improvement, or can point out any mistakes that you have found in the Operating Instructions, we will be most grateful for your comments.

3a8082e126