Wireless Adapter Drivers For Windows 10
Gaby Zenz
It has a wireless network adapter Intel Wireless-AC9560 160MHz. The problem is it randomly stops working. 1st time i faced this issue was in around June,2020. I got freaked out and just did a system restore, and everything came back to normal.
But I started facing this issue again from starting of Oct. The adapter stops working and the wifi stops cause of it. Error message when I go to properties:This device has stopped working (something of this sort)
Locate the drivers you downloaded back in Step 1. Run as administrator, and follow the wizard to completion. To Run as administrator right-click over the file you downloaded and select the option to Run as administrator.
We have not heard back from you, so we will close this inquiry. Please remember to follow the steps given above, and if after that you keep having this problem, you should contact the OEM as this can be a hardware problem.
Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.
I used this adapter for more than 4 weeks without any issues on Windows 7. I switched to Windows XP about 2 hours ago, installed all the drivers I had, and now WiFi isn't working. Can anyone provide a driver for this unbranded Chinese WiFi adapter?
My Wifi adapter suddenly disappeared after a restart. Now it does not appear in the device manager. There is no trace of a Wifi adapter whatsoever left in my laptop. All of this happened over night when the laptop was in shutdown state. I tried installing drivers but even that did not work. I tried to run Ubuntu on a USB to check and found no trace of a Wifi adapter even on Ubuntu. Ethernet works fine but keeps refreshing itself every 10-15 minutes. I've tried restarting the system several times and that is not working. Please suggest a solution to this problem.
Thanks for the response. I've disabled power saving mode for the LAN port but unfortunately, it did not solve the problem. Can you provide a link to the long forum post that you have mentioned in your reply? Any other help is most welcome. It has really become frustrating for me. Another point is that my laptop is not an old one. To be accurate, it is 1yr, 3months old. Is there any way to check if the hardware itself got damaged because I've almost exhausted all the other options.
Thank you for posting your query, I'll be more than glad to help you.
I understand that you are facing issues with your HP Notebook PC wherein the wi-fi adapter suddenly disappeared after a restart.
I continue to look thru the posts on this forum to see if anybody is making progress on the recent wireless connectivity issue and I just saw this:
the only way to fix it on the as of now new a6 7310 notebook is as follows- TYPE "device manager" into windows (10) search bar- SCROLL to "network adapters"-SELECT "realtek rtl8723be''''''''''''''''''''''''''''''' wifi adapter" (which is the route cause of the problem)-RIGHT CLICK and "update drivers" use the internet to find and auto install option and thats it.
You are welcome to try that and see what improvement you see and post back on the forum
As I have already mentioned, there is no Wifi adapter in the list of available network adapters. It disappeared after a restart as mentioned earlier. Please try to provide the solution to the problem. I have also tried the HP Support Assistant app troubleshooting and that does not help the cause at all.
I would like to know if your bios is a UEFI type, and if so, how you were able to disable the power savings feature for LAN in the BIOS. Since others with a UEFI bios reported that they cannot find that feature.
I am having the same issue. I spent a few hours yesterday trying to figure this out but I am still pretty new to Linux so have not had any luck yet. If I figure things out or find a more detailed guide I will share.
Has anyone been able to get this to work with kali? I moved the new driver over to /lib/firmware and disabled the default all fine. I am able to see networks only after turning wifi off and back on in the setting and cannot connect to any. Any thougths?
i have Intel Wi-Fi 6 AX200 , how do i know the version of my driver , can u write that command line in the 5 step for me ( im Linux beginner and my english is not good sorry ) , have been stuck with no wifi adapter found for 3 days
Thanks! With the dnf provides command I could figure out which package provides the actual blob needed. No Idea why, but non of the iwl* packages were installed. What I did now: # installed the package that provides the blob I copied manually ...
@NoneenoN Glad to see these firmware drivers have finally been added to the dnf package source. When I wrote my original post, this was not yet the case. The steps you provided should be the preferred way to install these drivers on Fedora (and RHEL/CentOS/Rocky) moving forward.
I tried that but device manager doesn't show any network adapter. I bought a macbook air just last week and installed windows 10 (education) on it. I see only 'network controller' in device manager. On a related note, I did have problems installing Windows 10 on this macbook. After Bootcamp assistant created the windows install disk on a flash drive, the computer restarted but did not automatically go to the install disk to bbot up. I had to restart it again and hold the option key for it to do that. So I still do not get the bootcamp screen when I startup. Could my problem be related to that?
I have a similar problem, except I am using a 2008/2009 iMac (I know, ancient by now) and Windows 7. I have been using Windows 7 on this Mac with wifi for a couple years now without apparent problems, but last week my Mac wouldn't boot up (stuck in endless loading at grey screen) (Windows side did boot up and appeared fine). Long story short, the Mac drive was corrupted and I ended up having to erase my Mac HD, reinstall the OS (I stick with Snow Leopard 10.6.8 on that computer), and restore my files with a Time Machine back-up.
Now having done that the Mac side seems to be back to normal, but the Windows 7 now will not connect to the Wifi. I tried uninstalling broadcom as was suggested here and doing the hardware scan. Broadcom reappeared on the list but my wifi connection did not return. Any ideas?
I can see the wifi router but it won't connect and took some time to figure out why. My workaround this persistent connectivity issue is to unplug my external monitor before connecting to the wifi router. This indicates I may have a power supply or power management issue. This issue only occurs in Bootcamp, not macOS so it's more likely a power management issue than a power supply issue. Maybe the factory fitted dedicated NVidia GeForce 750M in the high-end late 2013 15" Macbook Pro uses a lot of power when piping to a 4K external monitor via displayport. Once I'm connected to wifi in Bootcamp I can plug the monitor back in and proceed without issues.
I am totally not sure about the true reason. But just to cope with this trouble, I believe it worth to try it. By the way, when I connect the external monitor, I use the USB-C port on right side (using USB-C > D-sub adapter).
If BC drivers are not installed yet, using Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support find the W8.1 64-bit drivers appropriate for your Mac year/model and test. W10 is not officially supported yet.
If you really want to play with it, install it in VirtualBox or VMWare Fusion or something. At least the networking functions will work that way. Setting custom screen resolutions is still difficult if not impossible as it doesn't work with the display drivers in most virtualization packages that provide custom scaling, etc.
The issue may be that there was never offical compatiblity for the TL-WN725N V1 with windows 10. The chipset maker may have made one but TP-Link never confrimed the V1 of this adapter would work with Windows 10. Also it has been seen that each time MS updates Windows 10 there is always a chance current drivers will not work or have issues. In situations like that the Chipset make in this case realtek will have to look at the cause and develop a solution for that chipset. Since we do not give offical support for Windows 10 the best solution would be to check with Realtek if this particualr chipset will recieve an update for the new Windows 10 build.
At the beginning of November, i downloaded a few updates for windows 11 and I suddenly had multiple issues, doing research it appeared my motherboard failed. I replaced the motherboard, and the issues persisted. I wiped the hard drive and installed windows 10. The system is stable now but i am unable to connect to the internet. the Ethernet connection will not recognize the network and has an IP config error. The WiFi has a code 10 "will not start" error on device manager. SO far i have tried:
1. turning everything (including router and modem) off and back on again
2. I have verified with other devices that the Ethernet cable and router port work correctly.
3. updated drivers for LAN, WI-FI , and GPU (downloaded directly from ASUS site for the motherboard)
4. updated BIOS
5. verified modem has current software
6. verified IPv4 is turned on/disabled IPv6 (has since been turned back on)
7. used Google DSN for IPv4
8. cleared network cashe VIA CMD
9. the entire first page on google results for "Ethernet doesn't have a valid IP configuration"
10. reinstalled windows and repeated all previous steps
11. Removed the SSD, installed windows 11 on a brand new SSD
12. installed a wifi card through PCIe, disabled wifi and bluetooth on the BIOS page