Eeprom 95080
Vella Massart
The M95080-A125 and M95080-A145 are 8-Kbit serial EEPROM Automotive grade devices operating up to 145C. They are compliant with the very high level of reliability defined by the Automotive standard AEC-Q100 grade 0.
The memory array is based on advanced true EEPROM technology (Electrically Erasable PROgrammable Memory). The M95080-A125 and M95080-A145 are byte-alterable memories (1024 8 bits) organized as 32 pages of 32 byte in which the data integrity is significantly improved with an embedded Error Correction Code logic.
The M95080-A125 and M95080-A145 offer an additional Identification Page (32 byte) in which the ST device identification can be read. This page can also be used to store sensitive application parameters which can be later permanently locked in read-only mode.
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
Im replacing the engine control module with a used module with the same p/n . im trying to see if the vin and immo info is only stored on eeprom 95080 or is it also in the mcu . or do yall know of any other way of virginising , or changing vin #. thanks guys
Gilberto,Best way on these is to clone the ECU. Most modern Bosch PCMs share global identifiers and immo between flash and immobilizer memory. Just swapping the EEPROM will likely fail. Cloning this ECU is best done with BDM frame and Bosch adapter.
buenos dias necesito leer borrar y grabar una memoria eeprom 95080 que esta dentro de una ecu automotriz deseaba saber cual era el procedimiento adecuado con una placa arduino ya que de verdad tengo muy poca experiencia en esto por favor mucho les sabria agradecer de su valiosa colaboracion y si esto generaria algun costo extra yo estoy dispuesto asumirlo muchas gracias y por favor ruego que me tengan paciencia
The M95080-A125 and M95080-A145 are 8-Kbit serial EEPROM Automotive grade devices operating up to 145C. They are compliant with the very high level of reliability defined by the Automotive standard AEC-Q100 grade 0.The devices are accessed by a simple serial SPI compatible interface running up to...
Read More