Midi2lr + Korg Nanokontrol 2 - problem with knobs and others

[Wojciech Piskorski]

First of all - english is not my first language, but I hope You'll understand ;)

I just got Korg Nanokontrol 2, and it seems that knobs are not working properly. E.G: knob is assigned to temperature. While I turn it slightly temperature doesn't change at all, or jumps from 2000 (lower limit) to 50000 (upper limit), sometimes it stops in the middle...

Problem with faders: most of the times I have to move fader up and down to "activate" the assigned function, sometimes it also takes few seconds to activate. Is it normal?

Other thing - midi2lr shuts down whenever I move two or more faders at the same time...

Any ideas what can be wrong?

Midi2lr 2.3.0.0

Windows 7 64 bit

Lightroom version: CC 2015.12 [ 1125239 ]

[Rory Jaffe]

what values does the app display when you move the knob? Read this section of the wiki: https://github.com/rsjaffe/MIDI2LR/wiki/MIDI-Controller-Setup#controllers-that-send-relative-values-or-have-unusual-ranges for more information. You may have the knob set to send relative values instead of absolute values. The app can handle that but you need to set it up--see the link above for instructions.

[Wojciech Piskorski]

Hello again, 

The app displays only three values for the knob: 2, 66 and 127. Also it seemes reversed -2 is in the maximum right position and 127 is when I turn the knob to the left. Other thing - if I turn the knob few times left and right, the app is being shut down, every time...

"CC message type" is set to Absolute, and changing it to any other option doesn't change anything.

[Rory Jaffe]

See the wiki https://github.com/rsjaffe/MIDI2LR/wiki/MIDI-Controller-Setup#controllers-that-send-relative-values-or-have-unusual-ranges .

You probably have it set to twos complement, though doesn't make any sense. Try setting the CC message type to twos complement to see if that fixes it.