Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Perspective Rectifier 3.3
47 views
Skip to first unread message
Eryn Diamante
Dec 26, 2023, 1:35:43 PM12/26/23
to
Image rectification is a transformation process used to project images onto a common image plane. This process has several degrees of freedom and there are many strategies for transforming images to the common plane. Image rectification is used in computer stereo vision to simplify the problem of finding matching points between images (i.e. the correspondence problem), and in geographic information systems to merge images taken from multiple perspectives into a common map coordinate system.
perspective rectifier 3.3
DOWNLOAD https://t.co/2IOPkbOO1b
Wltr0,
This is 20 questions bundled into one forum post :D, you will not be satisfied by whatever I might reply :) as the questions themselves are more consulting in nature, where you pay someone to consult you on the implementation.
1. For hysteresis control, we don't have a good example that i can point to that we have done. There is a lot more to it than what meets the eye here, what are the limits on the switching frequency on your hysteresis controller etc. I believe you have asked this question previously.
2. We currently don;t have any hysteresis based current controller design, nor a three phase PFC (we do have vienn rectifier TIDM-1000) but not the one you are looking at right now. Hence i cannot recommend anything on this.
2. F28069 should have enough performance to do what you are doing from a bandwidth perspective.
Maybe some one from the community can help, but from TI side I am not sure how i can provide you a specific answer for such a broad question.
regards
Manish
Abstract:Schottky diode (SD) has seen great improvements in the past few decades and, for many THz applications, it is the most useful device. However, the use and recycling of forms of energy such as solar energy and the infrared thermal radiation that the Earth continuously emits represent one of the most relevant and critical issues for this diode, which is unable to rectify signals above 5 THz. The goal is to develop highly efficient diodes capable of converting radiation from IR spectra to visible ones in direct current (DC). A set of performance criteria is investigated to select some of the most prominent materials required for developing innovative types of electrodes, but also a wide variety of insulator layers is required for the rectification process, which can affect the performance of the device. The current rectifying devices are here reviewed according to the defined performance criteria. The main aim of this review is to provide a wide overview of recent research progress, specific issues, performance, and future directions in THz rectifier technology based on quantum mechanical tunneling and asymmetric structure.Keywords: energy harvesting; rectifying antenna; quantum tunneling; ballistic transport; quasi-ballistic transport
Sensus and American Innovations teamed up to offer a device that measures rectifier AC and DC charges and transmits that data over the FlexNet communication network. The Bullhorn RM4160 covers your impressed current-protected pipe sections, allowing you to configure high and low thresholds to alert you to out-of-range values. You can also use time-synchronized current interruption for PHMSA Instant-Off tests.
The proper term for what you are wanting to do is called deskewing. Deskewing fixes the perspective issues you are having by using a handheld scanner. It also typically involves resizing the image back to its original print size as well. This is common in architectual and aerospace fields when converting paper/mylar prints into digital versions. Tools like Gimp and Photoshop can do this, but require a delicate touch to avoid artifacts on the produced image.
Fortunately neither of these devices can have problems related to perspective, as none of them generates its image by conical or pyramidal projection through pointlike apertures (stenope, pinhole, lens system). Its optical mechanism provides ideally a contact copy (in old photographic terms) of the original. The surfaces of the object and image planes are parallel and therefore cannot produce perspective distortions (which are consequent to distances and angles intervening between them). What is more, each pixel of the sensor has its own exclusive aperture for itself so that posible perspective problems would be limited to its minuscule individual area. The perspectival aspects of paintings and photographs extend on the contrary to the whole surface of the image.
Therefore the tools provided by image manipulation programs for handling perspective issues (in its proper sense) are not pertinent to this case. As well the Tools / Transform tools / Perspective tool as the very well conceived and exemplarly documented Ez perspective filter of Gimp ( ) deal with the image as a whole, as they should do, whereas what the problem under consideration usually requieres is the manipulation of just some part of it.
Voltages are always relative so in a transformer /bridge rectifier circuit we can take our '0V' (ground) from the perspective of the transformer or the load. Normally we take the load. Either way it makes absolutely no difference to the voltage across the diodes and the direction of current.
Drug-induced QT interval prolongation with or without Torsade de Pointes has led to the withdrawal, or severe prescribing restrictions being placed on the use, of many drugs. Other drugs have been denied regulatory approval because of their 'QT liability'. This mechanism-based toxicity results principally from inhibition of IKr, the rapid component of delayed rectifier potassium current. The KCNH2 (hERG) gene encodes the physiologically germane alpha-subunits of the channels that conduct this current. Among the battery of non-dinical tests used to characterize a drug for its 'QT liability' are the hERG channel studies. Studies with the hERG channel have been used for early screening of lead compounds and making 'go-no-go' decisions. However, the predictive value of these studies is limited by inter-laboratory variations, a high false-positive rate and lack of a consensus on the definition of a negative study ('safety margins'). From a regulatory perspective, it is reassuring that clinical torsadogens have always been hERG positive with no false negatives. hERG channel studies are useful in guiding electrocardiographic safety monitoring in early human studies, evaluating the relative risks of metabolites and enantiomers of a drug and clarifying uncertain mechanisms of action. One emerging issue of concern is the effect of drugs on hERG trafficking. Classical hERG channel studies will not identify these drugs. For adequate risk assessment, hERG channel data should be integrated with all other non-clinical and clinical data; otherwise there is a risk of novel and valuable drugs being rejected from development and/or denied regulatory approval.
Designing electrolytes from the perspective of degrees of freedom (DOF) allows for new and simpler explanations for many electrolyte modifications. The electrolyte system containing three-dimensional movement of K+ and highly free solvents mentioned above can be considered as DOF of K+ flux to 3, which is common in low-concentration electrolytes (Fig. 1a) [6, 17]. In recent years, many efforts have been made in develop improved electrolytes. High-concentration/localized high-concentration/suspension electrolytes have been formulated by adding large amounts of salts/inert non-solvating diluents/insoluble solids to realize some desired properties of improved battery performance (Fig. 1b) [18,19,20,21]. Based on the DOF concept, these electrolyte modifications essentially reduce the DOF of the K+ to promote the electrochemical property. Specifically, adding salts increased the interaction between anions and cations, thereby binding the DOF of K+. The salt addition also promoted the concentration of K+, decreasing the spatial DOF that each K+ can possess. The inert non-solvating diluents and insoluble solids in electrolyte systems occupy spatial positions but do not participate in the K+ solvation. Instead, they compress the movable space of K+ and decrease their spatial DOF. In addition, removing free solvents is an advisable method commonly used in the design of solid-state electrolytes (Fig. 1c) [22,23,24]. Nevertheless, this method may lead to significant polarization and disappointing ionic conductivity, as the loss of solvent results in low K+ mobility and some K+ may only jumping between the certain functional groups [23,24,25,26]. In advanced electrolyte designs, the solvents that are ionic lubricants in the electrolyte system are more beneficial. Notwithstanding these advances, avoiding ion jumping, maintaining the original ion mobility, and utilizing suitable amounts of salt and solvent molecules for superior battery performance is a highly demanding problem that requires great effort.
An extensive voltage window is of great significance for advanced electrolyte, because it determines whether the electrolyte is universal [39]. The linear sweep voltammetry (LSV) shown the cycle voltage of cathode assembled with organic liquid imide-potassium salt-based electrolytes is generally not higher than 4 V (vs. K+/K) (Fig. 2j) [39]. But significantly, this electrochemical window of K+ flux rectifier electrolyte has enlarged to 5.9 V (vs. K+/K), much higher than that of 1 M KFSI EC/DEC electrolyte (purple curve in Fig. 2j) and provided the basis for exploring high-voltage cathodes. Also, it means that the high-voltage oxidative stability is much improved.
Over the last decade, there has been increasing interest in transferring the research advances in radiofrequency (RF) rectifiers, the quintessential element of the chip in the RF identification (RFID) tags, obtained on rigid substrates onto plastic (flexible) substrates. The growing demand for flexible RFID tags, wireless communications applications and wireless energy harvesting systems that can be produced at a low-cost is a key driver for this technology push. In this topical review, we summarise recent progress and status of flexible RF diodes and rectifying circuits, with specific focus on materials and device processing aspects. To this end, different families of materials (e.g. flexible silicon, metal oxides, organic and carbon nanomaterials), manufacturing processes (e.g. vacuum and solution processing) and device architectures (diodes and transistors) are compared. Although emphasis is placed on performance, functionality, mechanical flexibility and operating stability, the various bottlenecks associated with each technology are also addressed. Finally, we present our outlook on the commercialisation potential and on the positioning of each material class in the RF electronics landscape based on the findings summarised herein. It is beyond doubt that the field of flexible high and ultra-high frequency rectifiers and electronics as a whole will continue to be an active area of research over the coming years.
0aad45d008
perspective rectifier 3.3
DOWNLOAD https://t.co/2IOPkbOO1b
Wltr0,
This is 20 questions bundled into one forum post :D, you will not be satisfied by whatever I might reply :) as the questions themselves are more consulting in nature, where you pay someone to consult you on the implementation.
1. For hysteresis control, we don't have a good example that i can point to that we have done. There is a lot more to it than what meets the eye here, what are the limits on the switching frequency on your hysteresis controller etc. I believe you have asked this question previously.
2. We currently don;t have any hysteresis based current controller design, nor a three phase PFC (we do have vienn rectifier TIDM-1000) but not the one you are looking at right now. Hence i cannot recommend anything on this.
2. F28069 should have enough performance to do what you are doing from a bandwidth perspective.
Maybe some one from the community can help, but from TI side I am not sure how i can provide you a specific answer for such a broad question.
regards
Manish
Abstract:Schottky diode (SD) has seen great improvements in the past few decades and, for many THz applications, it is the most useful device. However, the use and recycling of forms of energy such as solar energy and the infrared thermal radiation that the Earth continuously emits represent one of the most relevant and critical issues for this diode, which is unable to rectify signals above 5 THz. The goal is to develop highly efficient diodes capable of converting radiation from IR spectra to visible ones in direct current (DC). A set of performance criteria is investigated to select some of the most prominent materials required for developing innovative types of electrodes, but also a wide variety of insulator layers is required for the rectification process, which can affect the performance of the device. The current rectifying devices are here reviewed according to the defined performance criteria. The main aim of this review is to provide a wide overview of recent research progress, specific issues, performance, and future directions in THz rectifier technology based on quantum mechanical tunneling and asymmetric structure.Keywords: energy harvesting; rectifying antenna; quantum tunneling; ballistic transport; quasi-ballistic transport
Sensus and American Innovations teamed up to offer a device that measures rectifier AC and DC charges and transmits that data over the FlexNet communication network. The Bullhorn RM4160 covers your impressed current-protected pipe sections, allowing you to configure high and low thresholds to alert you to out-of-range values. You can also use time-synchronized current interruption for PHMSA Instant-Off tests.
The proper term for what you are wanting to do is called deskewing. Deskewing fixes the perspective issues you are having by using a handheld scanner. It also typically involves resizing the image back to its original print size as well. This is common in architectual and aerospace fields when converting paper/mylar prints into digital versions. Tools like Gimp and Photoshop can do this, but require a delicate touch to avoid artifacts on the produced image.
Fortunately neither of these devices can have problems related to perspective, as none of them generates its image by conical or pyramidal projection through pointlike apertures (stenope, pinhole, lens system). Its optical mechanism provides ideally a contact copy (in old photographic terms) of the original. The surfaces of the object and image planes are parallel and therefore cannot produce perspective distortions (which are consequent to distances and angles intervening between them). What is more, each pixel of the sensor has its own exclusive aperture for itself so that posible perspective problems would be limited to its minuscule individual area. The perspectival aspects of paintings and photographs extend on the contrary to the whole surface of the image.
Therefore the tools provided by image manipulation programs for handling perspective issues (in its proper sense) are not pertinent to this case. As well the Tools / Transform tools / Perspective tool as the very well conceived and exemplarly documented Ez perspective filter of Gimp ( ) deal with the image as a whole, as they should do, whereas what the problem under consideration usually requieres is the manipulation of just some part of it.
Voltages are always relative so in a transformer /bridge rectifier circuit we can take our '0V' (ground) from the perspective of the transformer or the load. Normally we take the load. Either way it makes absolutely no difference to the voltage across the diodes and the direction of current.
Drug-induced QT interval prolongation with or without Torsade de Pointes has led to the withdrawal, or severe prescribing restrictions being placed on the use, of many drugs. Other drugs have been denied regulatory approval because of their 'QT liability'. This mechanism-based toxicity results principally from inhibition of IKr, the rapid component of delayed rectifier potassium current. The KCNH2 (hERG) gene encodes the physiologically germane alpha-subunits of the channels that conduct this current. Among the battery of non-dinical tests used to characterize a drug for its 'QT liability' are the hERG channel studies. Studies with the hERG channel have been used for early screening of lead compounds and making 'go-no-go' decisions. However, the predictive value of these studies is limited by inter-laboratory variations, a high false-positive rate and lack of a consensus on the definition of a negative study ('safety margins'). From a regulatory perspective, it is reassuring that clinical torsadogens have always been hERG positive with no false negatives. hERG channel studies are useful in guiding electrocardiographic safety monitoring in early human studies, evaluating the relative risks of metabolites and enantiomers of a drug and clarifying uncertain mechanisms of action. One emerging issue of concern is the effect of drugs on hERG trafficking. Classical hERG channel studies will not identify these drugs. For adequate risk assessment, hERG channel data should be integrated with all other non-clinical and clinical data; otherwise there is a risk of novel and valuable drugs being rejected from development and/or denied regulatory approval.
Designing electrolytes from the perspective of degrees of freedom (DOF) allows for new and simpler explanations for many electrolyte modifications. The electrolyte system containing three-dimensional movement of K+ and highly free solvents mentioned above can be considered as DOF of K+ flux to 3, which is common in low-concentration electrolytes (Fig. 1a) [6, 17]. In recent years, many efforts have been made in develop improved electrolytes. High-concentration/localized high-concentration/suspension electrolytes have been formulated by adding large amounts of salts/inert non-solvating diluents/insoluble solids to realize some desired properties of improved battery performance (Fig. 1b) [18,19,20,21]. Based on the DOF concept, these electrolyte modifications essentially reduce the DOF of the K+ to promote the electrochemical property. Specifically, adding salts increased the interaction between anions and cations, thereby binding the DOF of K+. The salt addition also promoted the concentration of K+, decreasing the spatial DOF that each K+ can possess. The inert non-solvating diluents and insoluble solids in electrolyte systems occupy spatial positions but do not participate in the K+ solvation. Instead, they compress the movable space of K+ and decrease their spatial DOF. In addition, removing free solvents is an advisable method commonly used in the design of solid-state electrolytes (Fig. 1c) [22,23,24]. Nevertheless, this method may lead to significant polarization and disappointing ionic conductivity, as the loss of solvent results in low K+ mobility and some K+ may only jumping between the certain functional groups [23,24,25,26]. In advanced electrolyte designs, the solvents that are ionic lubricants in the electrolyte system are more beneficial. Notwithstanding these advances, avoiding ion jumping, maintaining the original ion mobility, and utilizing suitable amounts of salt and solvent molecules for superior battery performance is a highly demanding problem that requires great effort.
An extensive voltage window is of great significance for advanced electrolyte, because it determines whether the electrolyte is universal [39]. The linear sweep voltammetry (LSV) shown the cycle voltage of cathode assembled with organic liquid imide-potassium salt-based electrolytes is generally not higher than 4 V (vs. K+/K) (Fig. 2j) [39]. But significantly, this electrochemical window of K+ flux rectifier electrolyte has enlarged to 5.9 V (vs. K+/K), much higher than that of 1 M KFSI EC/DEC electrolyte (purple curve in Fig. 2j) and provided the basis for exploring high-voltage cathodes. Also, it means that the high-voltage oxidative stability is much improved.
Over the last decade, there has been increasing interest in transferring the research advances in radiofrequency (RF) rectifiers, the quintessential element of the chip in the RF identification (RFID) tags, obtained on rigid substrates onto plastic (flexible) substrates. The growing demand for flexible RFID tags, wireless communications applications and wireless energy harvesting systems that can be produced at a low-cost is a key driver for this technology push. In this topical review, we summarise recent progress and status of flexible RF diodes and rectifying circuits, with specific focus on materials and device processing aspects. To this end, different families of materials (e.g. flexible silicon, metal oxides, organic and carbon nanomaterials), manufacturing processes (e.g. vacuum and solution processing) and device architectures (diodes and transistors) are compared. Although emphasis is placed on performance, functionality, mechanical flexibility and operating stability, the various bottlenecks associated with each technology are also addressed. Finally, we present our outlook on the commercialisation potential and on the positioning of each material class in the RF electronics landscape based on the findings summarised herein. It is beyond doubt that the field of flexible high and ultra-high frequency rectifiers and electronics as a whole will continue to be an active area of research over the coming years.
0aad45d008
0 new messages